Paradyne Hotwiret 7986 Snmp NMS Security Options, NMS IP Validation, Access Level

Page 14

Table 8. SNMP NMS Security Options

Possible Settings: Enable, Disable

Default Setting: Disable

Specifies whether security checking is performed on the IP address of SNMP management systems attempting to access the node.

Number of Managers

Possible Settings: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10

Default Setting: 1

Specifies the number of SNMP management systems that can send SNMP messages.

NMS n IP Address

Possible Settings: 000.000.000.000 ± 223.255.255.255, Clear

Default Setting: 000.000.000.000

Specifies the Internet Protocol address used to identify each SNMP trap manager.

Possible Settings: Read, Read/Write

Default Setting: Read

Determines the access level allowed for an authorized NMS when IP address validation is being performed.

March 1999

7986-A2-GZ40-00

Image 14

Contents Installation Overview Product Documentation on the World Wide WebConnecting Power to the Unit +24 Vdc Power Supply PinoutsConnecting to a System Terminal Connecting to the NetworkConnecting to a DTE CO Site Network ConfigurationEntering Identity Information If you select Then Choosing a Configuration ModeConfiguring the Unit Using the Configuration Menus Configuration Edit/Display Select To Access To ConfigureNetwork Interface Options 703 Interface Options System Options Communication Port Options 1Communication Port Options 2 Telnet Session Options Default Network Destination Node IP Address Possible Settings 000.000.000.000 ±Node Subnet Mask Possible Settings 000.000.000.000 ± Communication Protocol OptionsName 2 Access Community Name Possible Settings Ascii text field, PublicName 1 Access General Snmp Management OptionsNMS IP Validation Access LevelSnmp NMS Security Options Snmp Traps Options Configuring the Unit Using the Internal Switches Handling Precautions for STATIC-SENSITIVE DevicesSwitchpack Locations Switchpack S1 & S2Switchpack S1 Definitions Switch # Allows you to All OFF = Switchpack S2 Definitions Switch # Allows you toOFF = AutoRate Disabled OFF = Current FirmwareImportant Safety Instructions Warranty, Sales, Service, and Training Information EMI WarningsCopyright E 1999 Paradyne Corporation Asynchronous Terminal Interface MenuDocument Feedback