Paradyne Hotwiret 7986 installation instructions Telnet Session Options

Page 11

Table 5. Telnet Session Options

Telnet Session

Possible Settings: Enable, Disable

Default Setting: Enable

Specifies if the Termination Unit will respond to a Telnet session request from a Telnet client on an interconnected IP network.

Telnet Login Required

Possible Settings: Enable, Disable

Default Setting: Disable

Specifies whether a user ID and password are required to access to the ATI through a Telnet session. Login IDs are created with a password and access level.

Session Access Level

Possible Settings: Administrator, Operator

Default Setting: Administrator

The Telnet session access level is interrelated with the access level of the Login ID.

Inactivity Timeout

Possible Settings: Enable, Disable

Default Setting: Disable

Provides automatic logoff of a Telnet session.

Disconnect Time (Minutes)

Possible Settings: 1 ± 60

Default Setting: 5

Number of minutes of user inactivity before a Telnet session terminates automatically. Time out is based on no keyboard activity.

7986-A2-GZ40-00

March 1999

11

Image 11

Contents Product Documentation on the World Wide Web Installation Overview+24 Vdc Power Supply Pinouts Connecting Power to the UnitConnecting to a System Terminal Connecting to the NetworkConnecting to a DTE CO Site Network ConfigurationEntering Identity Information If you select Then Choosing a Configuration ModeConfiguring the Unit Using the Configuration Menus Select To Access To Configure Configuration Edit/DisplayNetwork Interface Options 703 Interface Options Communication Port Options 1 System OptionsCommunication Port Options 2 Telnet Session Options Communication Protocol Options Node IP Address Possible Settings 000.000.000.000 ±Node Subnet Mask Possible Settings 000.000.000.000 ± Default Network DestinationGeneral Snmp Management Options Community Name Possible Settings Ascii text field, PublicName 1 Access Name 2 AccessNMS IP Validation Access LevelSnmp NMS Security Options Snmp Traps Options Handling Precautions for STATIC-SENSITIVE Devices Configuring the Unit Using the Internal SwitchesSwitchpack S1 & S2 Switchpack LocationsSwitchpack S1 Definitions Switch # Allows you to OFF = Current Firmware Switchpack S2 Definitions Switch # Allows you toOFF = AutoRate Disabled All OFF =Important Safety Instructions EMI Warnings Warranty, Sales, Service, and Training InformationCopyright E 1999 Paradyne Corporation Asynchronous Terminal Interface MenuDocument Feedback