Paradyne 8310 MVLt, 8510 RADSL manual Network Protocol Options 1, Socket Statistics, UDP Statistics

Page 69

Monitoring the Hotwire DSLAM

Table 5-4. Network Protocol Options (1 of 5)

Socket Statistics	B-D-A

Displays management domain information for the interface. Enter the socket name from the active socket list to view information on the application assigned to the specified socket number.

Start Socket ± Enter the socket number to start the active socket list.

Active Socket List ± This is the heading information for the following fields. It lists all the information about the currently selected socket.

In addition, the lower right-hand corner of the screen displays a Socket Statistics window with detailed information about the selected destination. The Socket Statistics window displays the following information:

Socket ± Socket number.

Socket name ± Internal name of the socket.

Family ± Family of this socket (DARPA Internet).

Type ± Socket type (stream or datagram).

Local ± Port number on this card.

Remote ± Port number on remote card.

State ± Current state of the socket.

Input Bytes ± Bytes waiting in the socket for the owning application to process (will go to 0 when processed by the application).

Send Bytes ± Bytes waiting to be sent out to the remote machine.

PDU Drops ± Incoming packets dropped (usually due to a lack of space).

Byte Drops ± Outgoing packets dropped (usually due to a lack of space).

UDP Statistics	B-D-B

Displays information on User Datagram Protocol (UDP) statistics for packets that terminate on the DSL card.

The counters increment in real time and you may press Ctrl-r at any time to reset the counters.

Output Packets ± Number of UDP packets sent out of the card.

Input Packets ± Number of UDP packets coming into the card.

No Receive Port ± Number of UDP packets coming into the card that had no receive port waiting.

Unchecksummed ± Number of UDP packets coming into the card that had no checksum.

Header Error ± Number of UDP packets coming into card that had an error with the packet header.

Incorrect Checksum ± Number of UDP packets coming into the card that had a bad checksum.

Bad Length ± Number of UDP packets coming into the card that are an illegal length (too short).

Other Error ± Number of UDP packets coming into the card that had an error, but not one of the above.

8000-A2-GB26-10

January 1999

5-13

Image 69

Contents HOTWIRE Dslam for 8310 MVL and 8510 Radsl Cards Copyright E 1999 Paradyne Corporation All rights reserved Contents Configuring the Hotwire Dslam Traps Contents Document Purpose and Intended Audience About This GuideSection Description Document SummaryDocument Number Document Title Product-Related DocumentsViii What is the Hotwire DSLAM? Hotwire Dslam System DescriptionHotwire Dslam Components Central Office COOptional Input Hotwire Dslam ChassisFront View of a Hotwire 8800 or 8810 Dslam Chassis Hotwire Dslam Features MCC CardRadsl or MVL Card Levels of Access Configuring the DSL CardsSoftware Functionality Monitoring the DSL Cards Troubleshooting and Diagnostics Overview Hotwire Menus and ScreensMenu and Screen Formats Components of a Hotwire MenuComponents of a Hotwire Screen Keys Definition Commonly Used Navigation KeysHotwire Chassis Main Menu Hotwire Menu HierarchyHotwire ± MCC Menu Hotwire ChassisHotwire DSL Hotwire ± DSL MenuDiagnostics ApplicationsDSL Card Configuration Menu DSL Card Monitoring Menu Logging In to the SystemUser Login Screen Reviewing the Levels of AccessCard Selection Screen D U X X Column Position Display Description HeadingExiting from the System Accessing the Hotwire ± DSL MenuManually Logging Out Automatically Logging OutService Domain Configuring the Hotwire DslamDomain Types Management DomainFor each DSL card, to See Configuring the DSL CardsConfiguring VNIDs on a DSL Card Configuring the Active Vnid on each DSL Port Addressing a Location Using Dhcp Configuring Static UsersConfiguring Subnet Masks Configuring Subnet AddressingConfiguring IP Filter Rules Configuring the Hotwire Dslam DSL Configuration Card Status Screens MVL and 8510 Radsl Card ConfigurationCard Info Card Information Card Status Options 1Time/Date Nvram ClearCard Reset Nvram Cfg Loader Nvram Configuration LoaderCard Status Options 2 DOS MachineDownload Code Download Code and Apply Download F a and B Card Status Options 3Download Code a or Apply Download B Apply Download BDSL Configuration Ports Screens Ports Options 1Ethernet Port DSL Ports Radsl Parameters 8510 Radsl Card Ports Options 2DSL Ports MVL Parameters 8310 MVL Card Ports Options 3DSL Configuration Interfaces Screens Interfaces Options General General InterfacesControl Control Interfaces DSL Configuration Bridge Screens DSL Configuration Users ScreensGeneral General Bridge Parameters Bridge Options 1Card Vnid Port VnidClient Vnid Bridge Options 2ARP Entry Add ARP Entry B Bridge Options 3DSL Configuration Service Node Screens SN Configuration Service Node OptionsDSL Configuration Filters Screen IP Filters IP Filter Configuration screen Filters Options 1IP Filters IP Filter Table IP Filters IP Filter Configuration Filters Options 2Destination Address ± nnn.nnn.nnn.nnn format DSL Monitoring Card Status Screens Monitoring the Hotwire DslamLogin History Card Status OptionsCard Info General Card Information Syslog Screen Example DSL Monitoring Physical Layer Screens Physical Layer Options 1Active List Active Ports List Ethernet Stats Ethernet Statistics Physical Layer Options 2Physical Layer Options 3 EtherHDLC Stats EtherHDLC StatisticsInitialized EtherHDLC Ports ± s1c, s1d, s1e, or s1f DSL Link Perf DSL Link Performance Summary Physical Layer Options 4Physical Layer Options 5 DSL Perf Stats DSL Performance StatsCustomer Data DSL Error Stats Physical Layer Options 6DSL Xmit Status DSL Transmit Stats DSL Monitoring Interfaces Screens Monitor Interfaces Options Active List Active Interfaces ListStatus Interface Status DSL Network Protocol Screens Network Protocol Options 1 Socket StatisticsUDP Statistics TCP Statistics TCP Data Statistics Network Protocol Options 2Network Protocol Options 3 TCP Connection StatisticsIP Statistics Network Protocol Options 4 Icmp Statistics Icmp Packet StatisticsSnmp Statistics Network Protocol Options 5 Snmp Authentication StatisticsBridge Table DSL Bridge ScreensMAC Table ClientItem to Display ± Entry number ARP Table VnidDSL SN Information Screen DSL Monitoring IP Filters Screen Default filter action ± Forward/discardIP Filters Filter TableDiagnostic Screens Diagnostics and TroubleshootingAlarms Card Alarms Diagnostics OptionsSelftest DSL Packet Echo TestChecking Alarms TroubleshootingMajor Alarms 1 Action No Response at StartupMajor Alarms 2 Action Margin Threshold Minor Alarms 1 ActionMinor Alarms 2 Action Link DownThreshold High-Level Troubleshooting Network ProblemsClient-to-Service Node Segment Client Cannot Ping the Gateway RouterIf the Client cannot Ping the Gateway Router Then Client-to-Service Node Segment Layer Solution Client Cannot Reach Service NodeLayer 1 ± PhysicalService Node-to-DSLAM Segment 1 Layer Solution Client Cannot Reach DslamLayer 1 ± Physical Service Node-to-DSLAM Segment 2 Layer Solution Layer 2 ±Network Client Cannot Reach IPC Movefromdef=1 DSLAM-to-IPC Segment Layer SolutionClient Cannot Reach Router IPC-to-Router Segment Layer SolutionRouter-to-IPC Segment Layer Solution Cannot Upload Configurations to a Unix ServerExamining Performance Issues Go To Performance Issues ± Viewing Network StatisticsDownload Code Download Only System Automatic Immediate Apply Download CodeTraps DSL Card TrapsEvent Severity Comment Trap # Traps MIB Traps Glossary Dhcp Relay Agent Default routeDhcp Server DomainHost routes HostHub InternetOpenLane DCE Service NodeManager PacketSubnet address Static routeSubnet mask TelnetGL-6 IN-1 IndexIN-2