Paradyne 8310 MVLt, 8510 RADSL manual MAC Table, Client, Item to Display ± Entry number

Page 75

Monitoring the Hotwire DSLAM

Table 5-5. Bridge Options (2 of 3)

MAC Table	B-E-B

Displays the MAC table.

Bridge ± lb0 ± Name of the Logical Bridge (Equivalent to e1a Ethernet). Entry # ± Enter the MAC table entry number you wish to view.

Entries ± Number of entries in the MAC table.

Bridge Timer ± Timer that is used to show dynamic MAC addresses.

#± Entry number.

MAC Address ± MAC address in xx.xx.xx.xx.xx.xx format.

VNID ID ± VNID ID associated with the MAC address.

Age (Secs) ± Age in seconds since the address was last used.

Intf ± Interface behind which the network element associated with the MAC address lies.

Flags ± Dynamic = MAC addresses that are determined via DHCP. Perm (DHCP) = MAC addresses are determined by the lease time. Entries in the MAC table will be removed when the lease time expires.

Client	B-E-C

Displays information on specific clients or allowable subnets.

DSL Port # ± Enter the DSL port number 1±4 (Default = 1).

Item to Display ± Entry number.

Total ± Total number of users.

Item ± Enter the input number of the client (Default = 0).

IP Address ± Client IP address in nnn.nnn.nnn.nnn format (Default = 0).

Subnet Mask or Lease Expiration ± Variable based on Static or Dynamic entry. For static entries, Subnet Mask is used with IP address to specify a range of allowable static host IP entries to the Client table. For dynamic entries, Lease Expiration is the date and time when the client's DHCP lease expires.

NHR ± IP address of the default next hop router in nnn.nnn.nnn.nnn format.

VNID ± VNID between 2±4094 (Default = none).

Type ± S = Static or D = Dynamic.

Port Specific Parameters ± Enabled/Disabled. Shows active VNID information.

NOTE: In order to display the following information, VNID has to be activated on the Port screen in the Configuration Bridge screen menu (A-E-C). Refer to Table 4-4, Bridge Options, in Chapter 4, 8310 MVL and 8510 RADSL Card Configuration.

DNHR: ± Default next hop router name.

IP Scoping: ± Enabled/Disabled.

Mux Mode: ± Enabled/Disabled.

IP Filtering: ± Enabled/Disabled. IP source filtering.

8000-A2-GB26-10

January 1999

5-19

Image 75

Contents HOTWIRE Dslam for 8310 MVL and 8510 Radsl Cards Copyright E 1999 Paradyne Corporation All rights reserved Contents Configuring the Hotwire Dslam Traps Contents Document Purpose and Intended Audience About This GuideSection Description Document SummaryDocument Number Document Title Product-Related DocumentsViii What is the Hotwire DSLAM? Hotwire Dslam System DescriptionHotwire Dslam Components Central Office COOptional Input Hotwire Dslam ChassisFront View of a Hotwire 8800 or 8810 Dslam Chassis Hotwire Dslam Features MCC CardRadsl or MVL Card Levels of Access Configuring the DSL CardsSoftware Functionality Monitoring the DSL Cards Troubleshooting and Diagnostics Overview Hotwire Menus and ScreensMenu and Screen Formats Components of a Hotwire MenuComponents of a Hotwire Screen Keys Definition Commonly Used Navigation KeysHotwire Chassis Hotwire Menu HierarchyHotwire Chassis Main Menu Hotwire ± MCC MenuApplications Hotwire ± DSL MenuHotwire DSL DiagnosticsDSL Card Configuration Menu DSL Card Monitoring Menu Logging In to the SystemUser Login Screen Reviewing the Levels of AccessCard Selection Screen D U X X Column Position Display Description HeadingAutomatically Logging Out Accessing the Hotwire ± DSL MenuExiting from the System Manually Logging OutManagement Domain Configuring the Hotwire DslamService Domain Domain TypesFor each DSL card, to See Configuring the DSL CardsConfiguring VNIDs on a DSL Card Configuring the Active Vnid on each DSL Port Addressing a Location Using Dhcp Configuring Static UsersConfiguring Subnet Masks Configuring Subnet AddressingConfiguring IP Filter Rules Configuring the Hotwire Dslam DSL Configuration Card Status Screens MVL and 8510 Radsl Card ConfigurationNvram Clear Card Status Options 1Card Info Card Information Time/DateDOS Machine Nvram Cfg Loader Nvram Configuration LoaderCard Reset Card Status Options 2Apply Download B Card Status Options 3Download Code Download Code and Apply Download F a and B Download Code a or Apply Download BDSL Configuration Ports Screens Ports Options 1Ethernet Port DSL Ports Radsl Parameters 8510 Radsl Card Ports Options 2DSL Ports MVL Parameters 8310 MVL Card Ports Options 3DSL Configuration Interfaces Screens Interfaces Options General General InterfacesControl Control Interfaces DSL Configuration Bridge Screens DSL Configuration Users ScreensPort Vnid Bridge Options 1General General Bridge Parameters Card VnidClient Vnid Bridge Options 2ARP Entry Add ARP Entry B Bridge Options 3DSL Configuration Service Node Screens SN Configuration Service Node OptionsDSL Configuration Filters Screen IP Filters IP Filter Configuration screen Filters Options 1IP Filters IP Filter Table IP Filters IP Filter Configuration Filters Options 2Destination Address ± nnn.nnn.nnn.nnn format DSL Monitoring Card Status Screens Monitoring the Hotwire DslamLogin History Card Status OptionsCard Info General Card Information Syslog Screen Example DSL Monitoring Physical Layer Screens Physical Layer Options 1Active List Active Ports List Ethernet Stats Ethernet Statistics Physical Layer Options 2Physical Layer Options 3 EtherHDLC Stats EtherHDLC StatisticsInitialized EtherHDLC Ports ± s1c, s1d, s1e, or s1f DSL Link Perf DSL Link Performance Summary Physical Layer Options 4Physical Layer Options 5 DSL Perf Stats DSL Performance StatsCustomer Data DSL Error Stats Physical Layer Options 6DSL Xmit Status DSL Transmit Stats DSL Monitoring Interfaces Screens Monitor Interfaces Options Active List Active Interfaces ListStatus Interface Status DSL Network Protocol Screens Network Protocol Options 1 Socket StatisticsUDP Statistics TCP Statistics TCP Data Statistics Network Protocol Options 2Network Protocol Options 3 TCP Connection StatisticsIP Statistics Network Protocol Options 4 Icmp Statistics Icmp Packet StatisticsSnmp Statistics Network Protocol Options 5 Snmp Authentication StatisticsBridge Table DSL Bridge ScreensMAC Table ClientItem to Display ± Entry number ARP Table VnidDSL SN Information Screen Filter Table Default filter action ± Forward/discardDSL Monitoring IP Filters Screen IP FiltersDiagnostic Screens Diagnostics and TroubleshootingDSL Packet Echo Test Diagnostics OptionsAlarms Card Alarms SelftestNo Response at Startup TroubleshootingChecking Alarms Major Alarms 1 ActionMajor Alarms 2 Action Margin Threshold Minor Alarms 1 ActionMinor Alarms 2 Action Link DownThreshold High-Level Troubleshooting Network ProblemsClient-to-Service Node Segment Client Cannot Ping the Gateway RouterIf the Client cannot Ping the Gateway Router Then Physical Client Cannot Reach Service NodeClient-to-Service Node Segment Layer Solution Layer 1 ±Service Node-to-DSLAM Segment 1 Layer Solution Client Cannot Reach DslamLayer 1 ± Physical Service Node-to-DSLAM Segment 2 Layer Solution Layer 2 ±Network Client Cannot Reach IPC Movefromdef=1 DSLAM-to-IPC Segment Layer SolutionClient Cannot Reach Router IPC-to-Router Segment Layer SolutionRouter-to-IPC Segment Layer Solution Cannot Upload Configurations to a Unix ServerExamining Performance Issues Go To Performance Issues ± Viewing Network StatisticsDownload Code Download Only System Automatic Immediate Apply Download CodeTraps DSL Card TrapsEvent Severity Comment Trap # Traps MIB Traps Glossary Domain Default routeDhcp Relay Agent Dhcp ServerInternet HostHost routes HubPacket Service NodeOpenLane DCE ManagerTelnet Static routeSubnet address Subnet maskGL-6 IN-1 IndexIN-2