Paradyne 8310 MVLt, 8510 RADSL manual Cannot Upload Configurations to a Unix Server

Diagnostics and Troubleshooting

Table 6-8 examines the Router-to-IPC segment of the network from the router end of the segment.

Table 6-8. Router-to-IPC Segment

Layer	Solution
Layer 2 ±	1. On the router, make sure that the defined line characteristics agree with
Network		the characteristics defined on the IPC.
	2.	Make sure a virtual circuit is configured under the respective ATM
		subinterface. The PVC number should correspond to the PVC number
		on the IPC.
	3.	Make sure a bridge-group number is configured under the respective
		ATM subinterface and that the BVI number is the same as the
		bridge-group number.
	4.	Make sure encapsulation on the router is the same as on the IPC
		(RFC1483).
	5.	Make sure the client's default gateway is the same as the IP address for
		BVI on the appropriate ISP router.
	6.	If a Ping from the client is not successful, issue a show ARP-cache
		command on the router to make sure the correct MAC address and
		client IP address appear.

Cannot Upload Configurations to a UNIX Server

"Procedure

If the TFTP server denies write permission and displays the message

TFTP recv failure:

1.Before uploading configurations, create a dummy file and give it global Read-Write permissions.

2.Configure TFTP host to have Write permissions in the specified directory.

8000-A2-GB26-10 January 1999 6-15