Paradyne Hotwire 5446 installation instructions Before You Begin, Wiring and Cables Needed

Page 1

TM

Hotwire 5446 RTU Customer Premises

Installation Instructions

Document Number 5446-A2-GN10-60

May 1999

Before You Begin

The Hotwire 5446 RTU (Remote Termination Unit) interoperates with the Hotwire 8546 DSL Card in the DSLAM (Digital Subscriber Line Access Multiplexer) system.

An optional POTS (Plain Old Telephone Service) splitter is available for the Hotwire 5446 RTU. When a POTS splitter is installed, the telephone and 5446 RADSL (Rate Adaptive Digital Subscriber Line) RTU can function at the same time over the same pair of copper wires. In order to confirm the RTU installation, the POTS splitter should be installed first.

To install a POTS splitter, refer to the appropriate POTS splitter document:

Document Number

Document Title

5030-A2-GN10

Hotwire 5030

POTS Splitter Customer Premises

 

Installation Instructions

5038-A2-GN10

Hotwire 5038

Distributed POTS Splitter Customer

 

Premises Installation Instructions

Contact your sales or service representative to order additional product documentation.

Paradyne documents are available on the World Wide Web at www.paradyne.com. Select Library → Technical Manuals.

Wiring and Cables Needed

The following wiring and standard connectors are used with this product:

New or existing unshielded twisted-pair wiring (CAT3 or better). The CAT3 wiring must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or 26 AWG (.4 mm).

Standard RJ11 wall jack.

Standard Ethernet 8-pin, non-keyed modular plug for a PC or workstation. An Ethernet straight-through or crossover cable is used. Refer to Installing the Hotwire 5446 RTU, page 8, for Ethernet cable details.

After the RTU is installed and powered on, there are additional requirements in order to utilize the DSL and Ethernet connections. Refer to Hotwire 5446 RTU IP Setup,

page 16.

1

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Before You Begin Wiring and Cables NeededDocument Number Document Title Package Checklist What Does the Hotwire 5446 RTU Do?DSL Access with a Hotwire 5030 or 5038 Pots Splitter Network Service Provider DSL Access with a Hotwire 5038 Distributed Pots SplitterCustomer Premises CP DSL Access without a Pots Splitter Procedure Installing the DSL Access WiringPunchdown Block DSL/POTS Telephone Network Interface Device NIDRJ11 Wall Jack Hotwire RTU Installing the Hotwire 5446 RTUPots Splitter Ethernet Line Alarm red Power-OnDigital Subscriber Line green Ethernet Link green Optional RTU Wall Placement RTU Hardware Template Condition Status Status LEDsLED Symptom Action TroubleshootingHotwire 5446 RTU Next Hop Router Support Network Service Provider Example Hotwire 5446 RTU IP SetupExample using TCP/IP Network Settings with Windows Increasing the Number of End-User Systems Cables & ConnectorsPin # Function Ethernet Cable Pin Straight-Through ConnectionPin Ethernet Crossover Cable Function Pin # Pin # Function Specification Hotwire 5446 RTU Technical SpecificationsImportant Safety Instructions Japan Declaration of ConformityCanada EMI Warnings CE MarkingDocument Feedback Warranty, Sales, Service, and Training InformationTrademarks
Top Page Image Contents