Paradyne Hotwire 5446 installation instructions Ethernet Line

Page 9

2.Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the cable into the jack labeled ETHERNET.

HUse a straight-through cable and connect the other end to an Ethernet hub, or

Hotwire RTU

Ethernet

Line

POWER

ETHERNET

DSL

Ethernet

HubEthernet

Cable

97-15303-01

HUse an Ethernet crossover cable and connect the other end to a PC with an Ethernet Network Interface Card (NIC) or router.

Hotwire RTU

Ethernet

Line

 

POWER

PC with Ethernet

 

Network Interface

 

Card

Ethernet

 

Cable

ETHERNET

DSL

97-15303b

For RTU cable pin assignments, refer to Cables & Connectors, page 17.

9

Image 9
Contents Wiring and Cables Needed Before You BeginDocument Number Document Title What Does the Hotwire 5446 RTU Do? Package ChecklistDSL Access with a Hotwire 5030 or 5038 Pots Splitter DSL Access with a Hotwire 5038 Distributed Pots Splitter Network Service ProviderCustomer Premises CP DSL Access without a Pots Splitter Installing the DSL Access Wiring ProcedurePunchdown Block DSL/POTS Telephone Network Interface Device NIDRJ11 Wall Jack Installing the Hotwire 5446 RTU Hotwire RTUPots Splitter Ethernet Line Power-On Alarm redDigital Subscriber Line green Ethernet Link green Optional RTU Wall Placement RTU Hardware Template Condition Status Status LEDsLED Symptom Action TroubleshootingHotwire 5446 RTU Next Hop Router Support Hotwire 5446 RTU IP Setup Network Service Provider ExampleExample using TCP/IP Network Settings with Windows Cables & Connectors Increasing the Number of End-User SystemsPin # Function Pin Straight-Through Connection Ethernet CablePin Ethernet Crossover Cable Function Pin # Pin # Function Specification Hotwire 5446 RTU Technical SpecificationsImportant Safety Instructions Japan Declaration of ConformityCanada EMI Warnings CE MarkingWarranty, Sales, Service, and Training Information Document FeedbackTrademarks