Paradyne Hotwire 5446 installation instructions Status LEDs, Condition Status

Page 13

Status LEDs

All of the LEDs turn on and off during the power-on self-test. After a successful self-test, the LEDs should appear as indicated in BOLD in the Condition column below.

LED	Condition	Status

PWR	ON	RTU has power.

ALM	OFF	No active alarms.
	ON	An alarm condition exists.

TST	OFF	No active tests.
	ON	The TST LED is on during the power-on self-test and
		during a test initiated by the NSP.

DSL	Fast	RTU is establishing the active DSL link. The LED blinks
	blinking	on and off about five times per second.
	Slow	The DSL link is up and the RTU is establishing the active
	blinking	PPP link. The LED blinks on and off every two seconds.
	ON	The DSL/PPP link is ready to transmit and receive data.
	OFF	The DSL link has not been established.

ETHERNET	ON	The Ethernet 10BaseT connection to the Ethernet hub or
		PC is active.
	OFF	No Ethernet 10BaseT device is detected.

13

Image 13

Contents Before You Begin Wiring and Cables NeededDocument Number Document Title Package Checklist What Does the Hotwire 5446 RTU Do?DSL Access with a Hotwire 5030 or 5038 Pots Splitter Network Service Provider DSL Access with a Hotwire 5038 Distributed Pots SplitterCustomer Premises CP DSL Access without a Pots Splitter Procedure Installing the DSL Access WiringPunchdown Block DSL/POTS Telephone Network Interface Device NIDRJ11 Wall Jack Hotwire RTU Installing the Hotwire 5446 RTUPots Splitter Ethernet Line Alarm red Power-On Digital Subscriber Line green Ethernet Link green Optional RTU Wall Placement RTU Hardware Template Condition Status Status LEDsLED Symptom Action TroubleshootingHotwire 5446 RTU Next Hop Router Support Network Service Provider Example Hotwire 5446 RTU IP SetupExample using TCP/IP Network Settings with Windows Increasing the Number of End-User Systems Cables & ConnectorsPin # Function Ethernet Cable Pin Straight-Through ConnectionPin Ethernet Crossover Cable Function Pin # Pin # Function Specification Hotwire 5446 RTU Technical SpecificationsImportant Safety Instructions Japan Declaration of ConformityCanada EMI Warnings CE MarkingDocument Feedback Warranty, Sales, Service, and Training InformationTrademarks