Paradyne Hotwire 5446 installation instructions RJ11 Wall Jack

Page 7

The 5446 RTU connects to the local loop via wiring from the demarcation point to an RJ11 wall jack. The DSL twisted-pair wiring from the local loop terminates at a new or existing wall jack. It may be necessary to install a standard single RJ11 jack or replace a single jack with a double RJ11 jack.

Demarcation Point

Central

Office

POTS/DSL

Local Loop

Punchdown

Block or NID

Customer Premises

DSL

Twisted-pair

Wiring

DSL

RJ11

Jack

RTU

97-15343-02

"Procedure

1.Wiring can be run from the punchdown block or NID to a new or existing wall jack. Match the pair colors on both ends.

2.Label the DSL jack.

3.Reconnect the DSL access pair at the punchdown block or NID. Refer to Installing the DSL Access Wiring, page 5. Tighten both terminal screws with a flat- blade screwdriver.

RJ11 Wall Jack

97-15300a

The RJ11 6-pin jack uses the center two pins. For pin assignments, refer to Cables & Connectors, page 17.

Image 7

Contents Before You Begin Wiring and Cables NeededDocument Number Document Title Package Checklist What Does the Hotwire 5446 RTU Do?DSL Access with a Hotwire 5030 or 5038 Pots Splitter Network Service Provider DSL Access with a Hotwire 5038 Distributed Pots SplitterCustomer Premises CP DSL Access without a Pots Splitter Procedure Installing the DSL Access WiringPunchdown Block DSL/POTS Telephone Network Interface Device NIDRJ11 Wall Jack Hotwire RTU Installing the Hotwire 5446 RTUPots Splitter Ethernet Line Alarm red Power-OnDigital Subscriber Line green Ethernet Link green Optional RTU Wall Placement RTU Hardware Template Condition Status Status LEDsLED Symptom Action TroubleshootingHotwire 5446 RTU Next Hop Router Support Network Service Provider Example Hotwire 5446 RTU IP SetupExample using TCP/IP Network Settings with Windows Increasing the Number of End-User Systems Cables & ConnectorsPin # Function Ethernet Cable Pin Straight-Through ConnectionPin Ethernet Crossover Cable Function Pin # Pin # Function Specification Hotwire 5446 RTU Technical SpecificationsImportant Safety Instructions Japan Declaration of ConformityCanada EMI Warnings CE MarkingDocument Feedback Warranty, Sales, Service, and Training InformationTrademarks