Paradyne Hotwire 5446 installation instructions CE Marking, Canada EMI Warnings

Page 22

CE Marking

When the product is marked with the CE mark, this demonstrates full compliance with the following European Directives:

HDirective 73/23/EEC ± Council Directive of 19 February 1973 on the harmonization of the laws of the member states relating to electrical equipment designed for use within states relating to electrical equipment designed for use within certain voltage limits, as amended by Directive 93/68/EEC.

HDirective 89/336/EEC ± Council Directive of 3 May 1989 on the approximation of the laws of the member states relating to Electro-Magnetic Compatibility (EMC), as amended by Directive 93/68/EEC.

Canada EMI Warnings

!WARNING:

To Users of Digital Apparatus in Canada:

This Class B digital apparatus meets all requirements of the Canadian interference-causing equipment regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du règlement sur le matérial brouilleur du Canada.

Notice to Users of the Canadian Telephone Network

The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

CAUTION:

Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

22

Image 22
Contents Before You Begin Wiring and Cables NeededDocument Number Document Title Package Checklist What Does the Hotwire 5446 RTU Do?DSL Access with a Hotwire 5030 or 5038 Pots Splitter Network Service Provider DSL Access with a Hotwire 5038 Distributed Pots SplitterCustomer Premises CP DSL Access without a Pots Splitter Procedure Installing the DSL Access WiringPunchdown Block Telephone Network Interface Device NID DSL/POTSRJ11 Wall Jack Hotwire RTU Installing the Hotwire 5446 RTUPots Splitter Ethernet Line Alarm red Power-OnDigital Subscriber Line green Ethernet Link green Optional RTU Wall Placement RTU Hardware Template Status LEDs Condition StatusTroubleshooting LED Symptom ActionHotwire 5446 RTU Next Hop Router Support Network Service Provider Example Hotwire 5446 RTU IP SetupExample using TCP/IP Network Settings with Windows Increasing the Number of End-User Systems Cables & ConnectorsPin # Function Ethernet Cable Pin Straight-Through ConnectionPin Ethernet Crossover Cable Function Pin # Pin # Function Hotwire 5446 RTU Technical Specifications SpecificationImportant Safety Instructions Declaration of Conformity JapanCE Marking Canada EMI WarningsDocument Feedback Warranty, Sales, Service, and Training InformationTrademarks