Installing the Hotwire 5446 RTU
Place the Hotwire 5446 RTU on a flat surface with clearance for the rear connectors.
"Procedure
1.Use the supplied RJ11
Hotwire RTU
POWER
DSL
Jack
ETHERNET
DSL
If the Hotwire 5446 RTU is installed on the same line as POTS, a Hotwire 5038 Distributed POTS Splitter can be used as a filter. One 5038 Distributed POTS splitter is installed as a filter for each telephone, as shown below. To install the Hotwire 5038 Distributed POTS splitter, refer to Hotwire 5038 Distributed POTS Splitter Customer Premises Installation Instructions.
Customer
Premises (CP)
Distributed
POTS Splitter
LINE DSL | PHONE |
Line from
RJ11 Wall Jack
LINE DSL | PHONE |
Distributed
POTS Splitter
Distributed |
| Hotwire |
POTS Splitter | RTU | |
PHONE | LINE DSL |
|
Line from
RJ11 Wall Jack
8