3.Insert the power cord's round end into the jack labeled POWER. Plug the transformer into an AC outlet.
Hotwire RTU
Power
Jack
or
Transformer
or
The RTU hardware installation is now complete. When the power cord is installed, the RTU goes through a
Power-On
When power is applied, the RTU performs
Power – green
Alarm – red
Test – yellow
Digital Subscriber Line – green
Ethernet Link – green
PWR ALM TST | DSL | ETHERNET |
5446
TM
Refer to Troubleshooting, page 14, for LED indications requiring action.
10