Model 3202 Getting Started Guide | 4 • Web configuration |
|
|
Trap Host Pool
In the table of current trap host pool, you can set up the trap host. SNMP trap is an informational message sent from an SNMP agent to a manager. It is a management station (SNMP application) that receives traps. If you don’t define a trap host pool, then no traps are issued.
Click Modify to set up the trap host pool.
Figure 39. Trap host pool configuration
•Version: Select version for trap host. (Version 1 is for SNMPv1; Version 2 for SNMPv2;
•IP Address: Enter the trap host IP address
•Community: Enter the community password.
Click OK to finish the setup. The browser will prompt the configured parameters and check it before writing into NVRAM. Press Restart to reboot the Model 3202 with the new settings. Click Continue to configure other options.
Utility Options
This section allows you to manage utility options for the Model 3202, including system infor- mation, the configuration tool, upgrade information, log out of the system, and restart the sys- tem.
System Information
To review system information, click System Info in the Utility menu.
Figure 40. System Information page
Utility Options | 61 |