Patton electronic 3202 Utility Command Menu, Upgrade main software, Backup system configuration

Page 94

Model 3202 Getting Started Guide5 • Console and Telnet configuration

Utility Command Menu

Model 3202 has three utility tools embedded in the firmware: upgrade, backup and restore. You can update the new firmware via TFTP upgrade tools, backup the configuration via the TFTP backup tool and restore the configuration via the TFTP restore tool. To upgrade the firmware, you must have the new firmware file named *.bin that will be supported by supplier. Also, you must have your own TFTP server. For backup and restore operations, you must also have your own TFTP server to backup and restore the configuration files.

Move the cursor “ >>” to utility in the main menu and press Enter. The following menu displays:

>> upgrade

Upgrade main software

backup

Backup system configuration

restore

Restore system configuration

Upgrade main software

To upgrade the Model 3202 firmware, move the cursor “ >>” to upgrade in the utility menu and press Enter. Type the TFTP server IP address and name of the upgraded firmware file.

-----------------------------------------------------------------------------

Command: utility upgrade <ip> <file>

Message: Please input the following information.

TFTP server IP address (ENTER for default) <192.168.0.2>:

Upgrade filename (ENTER for default) <default.bin>:

-----------------------------------------------------------------------------

Backup system configuration

To backup the current system configuration, move the cursor “ >>” to backup in the utility menu and press Enter. Type the TFTP server IP address and name for the backup file.

-----------------------------------------------------------------------------

Command: utility backup <ip> <file>

Message: Please input the following information.

TFTP server IP address (ENTER for default) <192.168.0.2>:

Upgrade filename (ENTER for default) <default.bin>:

-----------------------------------------------------------------------------

Restore system configuration

To restore a saved configuration file, move the cursor “ >>” to restore in the utility menu and press Enter. Type the TFTP server IP address and name of the system configuration file you want to restore to the Model 3202.

-----------------------------------------------------------------------------

Command: utility restore <ip> <file>

Message: Please input the following information.

TFTP server IP address (ENTER for default) <192.168.0.2>:

Upgrade filename (ENTER for default) <default.bin>:

-----------------------------------------------------------------------------

Utility Command Menu

94

Page 93 Page 95
Image 94
Page 93 Page 95
Contents RocketLink Model Mailsupport@patton.com Summary Table of Contents Table of Contents Web configuration Console and Telnet configuration Contacting Patton for assistance Port pin-outs List of Figures Model 3202 Getting Started Guide List of Tables Audience About this guideStructure Precautions Impaired functioningTected by a circuit breaker Safety when working with electricityPreventing Electrostatic Discharge Damage Model 3202 firstClean the case with a soft slightly moist anti-static cloth General observationsTypographical conventions used in this document General conventionsChapter contents General informationModel 3202 overview ModelWAN 1-4 Link Model 3202 front panelLED descriptions LAN 1-4100MPort descriptions Model 3202 rear panelDC 9V 2A Reset button Ground terminalApplications overview Introduction Typical applicationDistance Chart 3200 Series Per Wire Pair Distance chartsDistance Chart Model 3202/4W 4 Wire/2 Pair Distance Chart Model 3202/8W 8 Wire/4 Pair Hardware installation Planning the installation AC Power Mains Network diagramIP related information Location and mounting requirements Installing the ModelConnecting cables Unpacking the ModelGrounding the Model 3202 and connecting power Grounding studConsole configuration requirements Configuring the ModelWeb configuration requirements Telnet configuration requirementsWeb configuration Web configuration TCP/IP setup Setting Up the WMISystem Login Operation mode and Mgmt port Basic Configuration OptionsSubnet Mask Host Name Soho Dhcp serverLAN Review and save basic setup changes IP Address Subnet Mask Gateway DNS Server 1 DNS Server 2Line Type Advanced Configuration OptionsAnnex Type Main Rate Wire modelTcpam Type SNR MarginVlan VID 802.1Q Tag-Based Vlan 1Q Tag-Based Vlan802.1Q Vlan Web configuration Port-Based Vlan Port-Based VlanPort-Based QinQ Tpid Tag Protocol Identifier Enter 33024 for IEEE802.1QQuality of Service QoS Port Based Priority QoS Port Based PriorityVlan Tag Priority QoS Vlan Tag PriorityDefault Service by WRR IP Dscp PriorityClass Delay NormalStays the same link layer and routing protocol keep alive Throughput Normal High ReliabilityQoS IP Dscp Priority Rate Control Rate ControlLine Status Status OptionsMgmt Status Security Administration Administration OptionsLAN Status User Profiles Remote Management HostsSnmp Administration Snmp AdministrationCommunity Pool Snmp community pool configurationTrap Host Pool Utility OptionsSystem Information Configuration Tool Configuration ToolUpgrade LogoutRestart RestartConsole and Telnet configuration Dhcp Server Dhcp Fixed Host DNS Proxy Host NameConsole and Telnet configuration Ctrl + C Quit configuring the item Ctrl +Q Access help Log in using TelnetInterface commands Log in to the console interfaceWindow structure Console/Telnet MenuMain Menu Tree Menu tree for authorized usersMenu tree for unauthorized users Main screen for authorized usersEnable Command Menu Setup Command Menu Link ModeMaximum Main Rate Clear IP Address Subnet MaskVlan Mode Setup Command Menu Pvid QoS Mode QoSQoS Mode Weight Value Queue WeightQueue Schedule Port-Based Priority QoS Vlan Tag Priority QoSIP Dscp Priority QoS Vlan Tag Index 0 1 2 3 4 5 6 Queue IndexPort ListRate Port SniffingMgmt Dhcp Server Dhcp Fixed HostDNS Proxy Factory DefaultHost Name Interface Status Status Command MenuShdsl Status ShdslSystem Show Command MenuWrite Command ConfigReboot Command Ping CommandUser Profile Administration Command MenuModify/Add User Telnet TCP Port SecurityLegal IP Address Pool Snmp CommunityReadWrite Trap hostReadOnly DeniedSupervisor Password Supervisor Password and IDSupervisor ID Backup system configuration Utility Command MenuUpgrade main software Restore system configurationExit Command Contacting Patton for assistance Warranty coverage Contact informationReturn for credit policy Out-of-warranty serviceReturns for credit RMA numbersAppendix a Compliance information CE Declaration of Conformity ComplianceRadio and TV interference FCC Part Authorized European RepresentativeAppendix B Specifications Management Connector Shdsl ConnectorEthernet Connector Shdsl SpecificationsDimensions Front Panel IndicatorsPower Supply WeightAppendix C Port pin-outs Console port EIA-561 RJ-45 8-pin portEthernet
Top Page Image Contents