1.1.1.4Example 4
QSP100EN.EXE (s0,b300,i3,wd8)
In example 4, the Enabler will configure the QSP-100 in socket 0 with a base address of 300H and IRQ 3 using a configuration memory window at segment D800. The QSP-100's interrupt status register will be enabled and the BIOS equipment list will not be updated.
1.1.1.5Example 5
QSP100EN.EXE (s0,b300,i5,r)
In example 5, the Enabler will release the configuration used by the QSP-100 in socket 0 using a configuration memory window at segment D000. The base address and IRQ parameters are ignored and may be omitted.
1.1.1.6Example 6
QSP100EN.EXE (s1,r,wcc)
In example 5, the Enabler will release the configuration used by the QSP-100 in socket 1 using a configuration memory window at segment CC00.