Quatech QSP-100 user manual

Page 30

6.Click on the QSP-100 item and then click on the button labeled "Properties".

7.Select the resource which requires a change (I/O range or IRQ) and select "Change Settings". Make the desired changes and then click on "OK". A shutdown of the system may be required to allow the settings to change. If prompted for a shutdown, select the option which restarts Windows 95.

8.The QSP-100 will be automatically re-configured to the desired settings.

9.The card is now ready for use.

QSP-100 Users Manual

27

Image 30

Contents QSP-100 Four Channel Asynchronous RS-232 Pcmcia Adapter Warranty Information Trademarks Compliances Electromagnetic Emissions EC Council Directive 89/336/EECFCC Class B Table Of Contents Page Introduction DOS / Windows 3.x Installation Client Driver Installation QSP-100 Client Driver for DOSCommand Line Options BaddressDevice = C\QSP-100\QSP100CL.SYS 1.3Example 1.6Example Common Problems QSP-100 Enabler for DOSPage Waddress QSP100EN.EXE QSP100EN.EXE s0,b300,i3,wd8 Memory Range Exclusion OS/2 Installation Drive\path\QSP100.SYS optionsConfiguring With System Assigned Resources Configuring With User Assigned Resources Advanced Configuration Topics Monitoring The Status Of Pcmcia Cards Invalid I/O Address When Using OS/2 Windows 95 Installation Installing a Quatech QSP-100 Under WindowsPage Important Note 2Viewing the QSP-100 Resource Settings Changing Configuration of the QSP-100Page Installing QSP-100 under Windows NT Installing QSP-100 Under Windows NTPage Page Installing Quatech Pcmcia Cards under Windows CE Windows CEPage Hardware Information External Connections This Page Left Blank Intentionally Specifications QSP-100 Version March