Quatech QSP-100 user manual Trademarks

Page 3

NOTICE

The information contained in this document cannot be reproduced in any form without the written consent of Quatech, Inc. Likewise, any software programs that might accompany this document can be used only in accordance with any license agreement(s) between the purchaser and Quatech, Inc. Quatech, Inc. reserves the right to change this documentation or the product to which it refers at any time and without notice.

The authors have taken due care in the preparation of this document and every attempt has been made to ensure its accuracy and completeness. In no event will Quatech, Inc. be liable for damages of any kind, incidental or consequential, in regard to or arising out of the performance or form of the materials presented in this document or any software programs that might accom- pany this document.

Quatech, Inc. encourages feedback about this document. Please send any written comments to the Technical Support department at the address listed on the cover page of this document.

Copyright ©2004

Quatech Inc.

5675 Hudson Industrial Parkway

Hudson, Ohio 44236

All rights reserved. Printed in the U.S.A.

Trademarks:

Quatech is a trademark of Quatech Inc. Other product and company names are registered trademarks or trademarks of their respective holders.

Image 3
Contents QSP-100 Four Channel Asynchronous RS-232 Pcmcia Adapter Warranty Information Trademarks Compliances Electromagnetic Emissions EC Council Directive 89/336/EECFCC Class B Table Of Contents Page Introduction DOS / Windows 3.x Installation QSP-100 Client Driver for DOS Client Driver InstallationBaddress Command Line OptionsDevice = C\QSP-100\QSP100CL.SYS 1.3Example 1.6Example QSP-100 Enabler for DOS Common ProblemsPage Waddress QSP100EN.EXE QSP100EN.EXE s0,b300,i3,wd8 Memory Range Exclusion Drive\path\QSP100.SYS options OS/2 InstallationConfiguring With System Assigned Resources Configuring With User Assigned Resources Advanced Configuration Topics Monitoring The Status Of Pcmcia Cards Invalid I/O Address When Using OS/2 Installing a Quatech QSP-100 Under Windows Windows 95 InstallationPage Important Note Changing Configuration of the QSP-100 2Viewing the QSP-100 Resource SettingsPage Installing QSP-100 Under Windows NT Installing QSP-100 under Windows NTPage Page Windows CE Installing Quatech Pcmcia Cards under Windows CEPage Hardware Information External Connections This Page Left Blank Intentionally Specifications QSP-100 Version March