Quatech QSP-100 user manual External Connections

Page 37

8. EXTERNAL CONNECTIONS

An adapter cable is included with the QSP-100 to convert the PCMCIA output connector into 4 standard D-9 male RS-232 connectors as shown in the figure below.

Port A

Port B

Port C

Port D

Figure 3. QSP-100 adapter cable to standard RS-232 connectors.

Gnd 5

9 RI

DTR 4

8 CTS

TxD 3

7 RTS

RxD 2

6 DSR

DCD 1

Figure 4. Standard D-9 male RS-232 connector signal assignment.

QSP-100 Users Manual

Image 37

Contents QSP-100 Four Channel Asynchronous RS-232 Pcmcia Adapter Warranty Information Trademarks EC Council Directive 89/336/EEC Compliances Electromagnetic EmissionsFCC Class B Table Of Contents Page Introduction DOS / Windows 3.x Installation QSP-100 Client Driver for DOS Client Driver InstallationBaddress Command Line OptionsDevice = C\QSP-100\QSP100CL.SYS 1.3Example 1.6Example QSP-100 Enabler for DOS Common ProblemsPage Waddress QSP100EN.EXE QSP100EN.EXE s0,b300,i3,wd8 Memory Range Exclusion Drive\path\QSP100.SYS options OS/2 InstallationConfiguring With System Assigned Resources Configuring With User Assigned Resources Advanced Configuration Topics Monitoring The Status Of Pcmcia Cards Invalid I/O Address When Using OS/2 Installing a Quatech QSP-100 Under Windows Windows 95 InstallationPage Important Note Changing Configuration of the QSP-100 2Viewing the QSP-100 Resource SettingsPage Installing QSP-100 Under Windows NT Installing QSP-100 under Windows NTPage Page Windows CE Installing Quatech Pcmcia Cards under Windows CEPage Hardware Information External Connections This Page Left Blank Intentionally Specifications QSP-100 Version March