Quatech user manual Installing QSP-100 under Windows NT, Installing QSP-100 Under Windows NT

Page 31

5 Installing QSP-100 under Windows NT

5.1 Installing QSP-100 Under Windows NT

To allow easy configuration of the QSP-100 the Quatech Device Manager for Windows NT has been written for the hardware. This configuration utility supports the QSP-100 only in block addressing mode.

To begin the installation, open Windows Explorer and search for the ‘Setup.exe’ command to install the Quatech Device Manager. <See following Windows Explorer figure.> (D:\Serial Port Adapters\Drivers\Windows NT 4.0 for PCI, PCMCIA,ISA). Once the installation is complete an icon will be placed on the desktop.

Windows NT Exporer

1. Locate and double click the Quatech Device Manager icon on the desktop.

QSP-100 Users Manual

28

Image 31

Contents QSP-100 Four Channel Asynchronous RS-232 Pcmcia Adapter Warranty Information Trademarks EC Council Directive 89/336/EEC Compliances Electromagnetic EmissionsFCC Class B Table Of Contents Page Introduction DOS / Windows 3.x Installation QSP-100 Client Driver for DOS Client Driver InstallationBaddress Command Line OptionsDevice = C\QSP-100\QSP100CL.SYS 1.3Example 1.6Example QSP-100 Enabler for DOS Common ProblemsPage Waddress QSP100EN.EXE QSP100EN.EXE s0,b300,i3,wd8 Memory Range Exclusion Drive\path\QSP100.SYS options OS/2 InstallationConfiguring With System Assigned Resources Configuring With User Assigned Resources Advanced Configuration Topics Monitoring The Status Of Pcmcia Cards Invalid I/O Address When Using OS/2 Installing a Quatech QSP-100 Under Windows Windows 95 InstallationPage Important Note Changing Configuration of the QSP-100 2Viewing the QSP-100 Resource SettingsPage Installing QSP-100 Under Windows NT Installing QSP-100 under Windows NTPage Page Windows CE Installing Quatech Pcmcia Cards under Windows CEPage Hardware Information External Connections This Page Left Blank Intentionally Specifications QSP-100 Version March