Quatech QSP-100 user manual

Page 33

4.Complete the final steps of the installation, insert the PCMCIA Card and re-boot the computer.

vAdditional help is availabe online

The DSP-100 PC Card should now be configured. In the future, Windows NT will automatically recognize and configure the QSP-100.

Note: Windows NT does not support ‘Plug and Play’ for PCMCIA cards. The PCMCIA Card must be inserted prior to starting Windows NT and can not be removed and reinserted while Windows NT is running.

QSP-100 Users Manual

30

Image 33

Contents QSP-100 Four Channel Asynchronous RS-232 Pcmcia Adapter Warranty Information Trademarks Compliances Electromagnetic Emissions EC Council Directive 89/336/EECFCC Class B Table Of Contents Page Introduction DOS / Windows 3.x Installation QSP-100 Client Driver for DOS Client Driver InstallationBaddress Command Line OptionsDevice = C\QSP-100\QSP100CL.SYS 1.3Example 1.6Example QSP-100 Enabler for DOS Common ProblemsPage Waddress QSP100EN.EXE QSP100EN.EXE s0,b300,i3,wd8 Memory Range Exclusion Drive\path\QSP100.SYS options OS/2 InstallationConfiguring With System Assigned Resources Configuring With User Assigned Resources Advanced Configuration Topics Monitoring The Status Of Pcmcia Cards Invalid I/O Address When Using OS/2 Installing a Quatech QSP-100 Under Windows Windows 95 InstallationPage Important Note Changing Configuration of the QSP-100 2Viewing the QSP-100 Resource SettingsPage Installing QSP-100 Under Windows NT Installing QSP-100 under Windows NTPage Page Windows CE Installing Quatech Pcmcia Cards under Windows CEPage Hardware Information External Connections This Page Left Blank Intentionally Specifications QSP-100 Version March