Quatech ESC-100 user manual Windows

Page 16

5.2 Windows 2000

1.After inserting a ESC-100 for the first time, the "Add New Hardware Wizard will appear at start up. Click the "OK" button.

2.The following dialog box insert the Quatech COM CD (shipped with the device). Click the "OK" button.

4.The following dialog box will display the appropriate INF file on the CD in the drive. Click the "OK" button.

5.Window will copy the INF file from the diskette and display a final dialog indication that the process is complete. Click the "Finish" button.

Quatech ESC-100 User's Manual

16

Image 16

Contents ESC-100 Warranty Information Page Declaration of Conformity Address Map and Special Registers Base Address and Interrupt Level IRQEnhanced Serial Adapter Identification Viewing Resources with Device ManagerConnector Type General InformationFeatures IND Option --- Surge Suppression UpgradeFactory Default Configuration Hardware ConfigurationEnable Scratchpad Register SPAD, J4 Force High-Speed Uart Clock X2, X4, or X8, J1-J3 Clock multiplier jumper optionsHardware Installation Jumper/connector locationsPort Address Range Enabling the Special Registers Interrupt Status RegisterOptions Register Bit Name DescriptionClock Rate Multiplier RR1 RR0Windows Configuration Windows MillenniumWindows Windows Windows Windows NT Viewing Resources with Device Manager Page DOS and Other Operating Systems DOS and other operating systemsQTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections ESC-100D Channel Output Configuration ESC-100D Connector PinoutsESC-100D Output Connectors CTS DSR ESC-100M only PCI Resource Map INTA#10Specifications Maximum Load pF Data Rate 10% 15% 20% 25% Kbaud Trans Time Troubleshooting Computer will not boot upESC-100D/M Revision March