Quatech ESC-100 user manual QTPCI.EXE Expert Mode display

Page 24

I/O regions, etc. Pressing the "N" key will show similar information for all non-Quatech PCI devices in the system, including those devices integrated on the motherboard. In this example, the "Base addr 0" resource is reserved.

For users interested in even more details, PCI BIOS information can be displayed by pressing the "B" key. Pressing the "I" key displays the PCI interrupt routing table.

Quatech PCI Configuration Information Display Software

Version 1.00

Quatech PCI adapters detected

 

---------------------------------------------

 

ESC-100d eight-port RS-232 adapter

 

Vendor ID 0x135c, Device id

0x0050

found in slot 0x04 on bus 0x00

Device/function code = 0x98,

Revision ID = 0x01 (Hardware revision A1)

PCI Class Code = 0x070200

Communications controller, multiport serial

Subsystem Vendor ID 0x135c, Subsystem Id 0x0050

INTA# mapped to IRQ 11 (route 0x61)

 

Base addr

0 =

0xfc80

I/O

0X80 bytes allocated

Base addr

1 =

0xfe80

I/O

0X40 bytes allocated

_

 

 

 

 

Q - Quatech PCI adapters

M - Change to Basic Mode

N - Other PCI devices

B - PCI BIOS details

X - EXIT

I - Interrupt routing details

Figure 15 --- QTPCI.EXE Expert Mode display

Quatech ESC-100 User's Manual

24

Image 24
Contents ESC-100 Warranty Information Page Declaration of Conformity Address Map and Special Registers Base Address and Interrupt Level IRQEnhanced Serial Adapter Identification Viewing Resources with Device ManagerConnector Type General InformationFeatures IND Option --- Surge Suppression UpgradeHardware Configuration Factory Default ConfigurationEnable Scratchpad Register SPAD, J4 Force High-Speed Uart Clock X2, X4, or X8, J1-J3 Clock multiplier jumper optionsHardware Installation Jumper/connector locationsPort Address Range Enabling the Special Registers Interrupt Status RegisterOptions Register Bit Name DescriptionClock Rate Multiplier RR1 RR0Windows Configuration Windows MillenniumWindows Windows Windows Windows NT Viewing Resources with Device Manager Page DOS and Other Operating Systems DOS and other operating systemsQTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections ESC-100D Channel Output Configuration ESC-100D Connector PinoutsESC-100D Output Connectors CTS DSR ESC-100M only PCI Resource Map INTA#10Specifications Maximum Load pF Data Rate 10% 15% 20% 25% Kbaud Trans Time Troubleshooting Computer will not boot upESC-100D/M Revision March