Quatech ESC-100 user manual Windows

Page 17

5.3 Windows 98

1.After inserting a ESC-100 for the first time, the "Add New Hardware Wizard will appear at start up. Click the "Next" button.

2.Select "Search for the best driver for you device". Click the "Next" button.

3.On the next dialog, select the "CD-ROM DRIVE" check box. Insert the PCI Communication Drivers CD (shipped with the device) into the CD-ROM. Click the "Next" button.

Quatech ESC-100 User's Manual

Image 17

Contents ESC-100 Warranty Information Page Declaration of Conformity Base Address and Interrupt Level IRQ Address Map and Special RegistersEnhanced Serial Adapter Identification Viewing Resources with Device ManagerGeneral Information Connector TypeIND Option --- Surge Suppression Upgrade FeaturesEnable Scratchpad Register SPAD, J4 Hardware ConfigurationFactory Default Configuration Clock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J1-J3Jumper/connector locations Hardware InstallationPort Address Range Interrupt Status Register Enabling the Special RegistersBit Name Description Options RegisterRR1 RR0 Clock Rate MultiplierWindows Millennium Windows ConfigurationWindows Windows Windows Windows NT Viewing Resources with Device Manager Page DOS and other operating systems DOS and Other Operating SystemsQTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections ESC-100D Connector Pinouts ESC-100D Channel Output ConfigurationESC-100D Output Connectors CTS DSR ESC-100M only INTA# PCI Resource Map10Specifications Maximum Load pF Data Rate 10% 15% 20% 25% Kbaud Trans Time Computer will not boot up TroubleshootingESC-100D/M Revision March