Patton electronic 1092ARC Configure the Rear Interface Card, DTE Shield DB-25 Pin 1 & Frgnd JB3

Page 12

3.3 CONFIGURE THE REAR INTERFACE CARD

The Model 1092ARC Series has several interface card options: the Model 1001RCM12545 (DB-25/RJ-45), 1001RCM13445 (M/34/RJ-45), 1001RCM11545 (DB-15/RJ-45), IM2RC/IA, or IM2R/F. Each of these options supports one DTE interface connection and one 2-Wire/4-Wire twisted pair line connection. Figure 4 below shows three interface options. If you are using the IM2RC/IA or IM2RC/F rear cards, refer to the IM2RC/IA or IM2RC/F manuals for configuration instructions.

ModelModelModel

1001RCM11545 1001RCM12545 1001RCM13445

RJ-45

RJ-45

RJ-45

DB-15 F DB-25 F

M/34 F

Figure 4. Model 1092ARC Series interface card options

Prior to installation, you will need to examine the rear card you have selected to be sure it is properly configured for your application. Each rear card is configured by setting straps located on the PC board. To configure the rear cards, you must set the configuration straps. Figure 5 below shows the orientation of these straps. Each strap can either be on pegs 1 and 2, or on pegs 2 and 3. Sections 3.3.1 and

3.3.2describe the strap locations and possible settings for each rear

card.

connected open

Figure 5. Orientation of Interface Card Straps

21

3.3.1 Model 1001RCM12545 Rear Card Strap Settings Figure 6 shows strap locations for the Model 1001RCM12545

(DB-25/RJ-45S) rear cards. These straps determine various grounding characteristics for the terminal interface and twisted pair lines. JB3 and JB4 are user configurable. JB2 must be set on pegs 1 and 2.

123

JB2

JB3 123

JB4

123

Figure 6. DB-25/RJ-45S strap locations

The table below provides an overview of interface strap functions for the rear interface cards. Following the table overview are detailed descriptions of each strap’s function.

INTERFACE CARD STRAP SUMMARY TABLE #1

Strap

Function

Position 1&2

Position 2&3

 

 

 

 

JB3

DTE Shield (Pin1) & FRGND

Connected*

Open

 

 

 

 

JB4

FRGND & SGND

Connected*

Open

 

 

 

 

* Indicates default setting

DTE Shield (DB-25 Pin 1) & FRGND (JB3)

In the connected position, this strap links DB-25 pin 1 & frame

ground. In the open position, pin 1 is disconnected from frame ground.

JB3

Position 1&2 = DTE Shield (Pin 1) and FRGND Connected Position 2&3 = DTE Shield (Pin 1) and FRGND Not Connected

SGND & FRGND (JB4)

In the connected position, this strap links DB-25 pin 7 (Signal Ground) and frame ground. In the open position, pin 1 is disconnected from frame ground.

JB4

Position 1&2 = SGND (Pin 7) and FRGND Connected Position 2&3 = SGND (Pin 7) and FRGND Not Connected

22

Image 12
Contents User Manual Table of Contents Warranty InformationRadio and TV Interference CE NoticeService iNFORMATION FeaturesEmail support@patton.com, or General Information1092A Snmp Management Solutions ConfigurationConfigure the Hardware Switches HTTP/HTML ManagementConfiguration Switch Set S1 Switches S1-1 and S1-2 Data RateReversible Interface Driver Board S1 Summary TableSwitch S1-3 Data Set Ready During Local Line Loopback Test Switches S1-4 Management SettingSwitches S1-6 and S1-7 Transmit Clock Source Switch S1-8 Response to Remote Loop RequestConfigure the Software Switches S5 Summary TableConfigure the Local 1092ARC Main Menu Option 1 Display Active ConfigurationMain Menu Option 2 Display Hardware Configuration Main Menu Option 3 Display Software ConfigurationMain Menu Option 4 Setup Software Configuration Clock ModeDTE Rate Data FormatWire/4-Wire Selection DSR During Local Line LoopResponse to Remote Digital Loop DTE Controlled Local Line LoopOFF Configure the Rear Interface Card Interface Card Strap Summary Table #1Strap Function Position 1&2 Position 2&3 DTE Shield DB-25 Pin 1 & Frgnd JB3Model 1001RCM13445 Rear Card Strap Settings Model 1001RCM11545 Rear Card Strap SettingsInterface Card Strap Summary Table #2 DTE Shield DB-15 Pin 1 & Frgnd JB3Installation Rack Power SupplyModel 1001R14 Rack Chassis For more informationInstall the Model 1092ARC Series Into the Chassis Wire the Model 1092ARC SeriesConnect to a DTE Device Connect to a DCE DeviceSignal PIN# LED Status IndicatorsTD & RD CTSTest Modes Local Line Loopback LLBRemote Digital Loopback RDL 3 V.52 BER Test Pattern Generator Patton Model # Description34F Connector-DCE Interface DB-25F Connector-DCE RS-232 InterfaceAppendix B Model 1092ARC Terminal Interface PIN Assignment Patton Model 1092ARC Terminal Interface PIN AssignmentRJ45 Connector RJ-45 Connector on 1000CC CardEIA Pin Number Signal

1092ARC specifications

The Patton Electronics 1092ARC is a versatile and robust device designed for reliable communication and connectivity in various applications. As a part of Patton's extensive product portfolio, the 1092ARC stands out due to its impressive feature set and advanced technologies, making it a preferred choice for network administrators and businesses seeking durable and efficient solutions.

One of the main features of the 1092ARC is its ability to support both voice and data transmission over an extended distance. This is particularly beneficial for organizations that require unified communications while maintaining cost-effectiveness. The device is equipped with two FXO ports and two FXS ports, allowing for the seamless integration of traditional telephony systems with IP-based networks.

The 1092ARC utilizes advanced echo cancellation technology, ensuring high-quality voice transmission without delays or disturbances. This feature significantly enhances the user experience, especially during critical voice communications. The device also supports various telephony protocols, including SIP and MGCP, providing flexibility in deployment and integration with existing networks.

In terms of connectivity, the 1092ARC offers dual Ethernet ports, allowing users to easily bridge multiple networks. This capability is complemented by its support for VLAN tagging, which enhances network management and traffic segmentation. The device also features an Integrated Network Management System (INMS) for streamlined monitoring and configuration, simplifying network administration.

Another standout characteristic of the 1092ARC is its rugged construction, designed to operate in challenging environments. With a wide operating temperature range and robust form factor, this device ensures reliable performance even in extreme conditions. Its energy-efficient design contributes to lower operational costs while delivering consistent performance.

The Patton 1092ARC also prioritizes security, featuring built-in firewall capabilities and support for VPN connections. These security measures protect sensitive data and communications from unauthorized access, making it an ideal choice for businesses concerned about data integrity and privacy.

Overall, the Patton Electronics 1092ARC is a highly capable device that combines advanced features, innovative technologies, and rugged durability. Its versatility in handling both voice and data communications makes it suitable for various applications, positioning it as a valuable asset in any modern communication infrastructure.