Patton electronic 1092ARC Service iNFORMATION, Email support@patton.com, or, General Information

Page 3

1.3 SERVICE iNFORMATION

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Services at:

tel: (301)975-1007;

email: support@patton.com, or;

www:http://www.patton.com.

NOTE: Packages received without an RMA number will not be accepted.

Patton Electronics’ technical staff is also available to answer any questions that might arise concerning the installation or use of your Model 1092ARC. Technical Service hours: 8AM to 5PM EST, Monday through Friday.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Year parts and labor. If any questions arise during installation or use of this product, please contact Patton Electronics’ Technical Support at: (301) 975-1007.

2.1 FEATURES

Synchronous data rates: 19.2, 32, 56, 64 and 128 kbps in all clock modes

Asynchronous data rates: 0 - 38.4 kbps

SNMP manageable using Patton Model 1001MC Card

Full duplex operation over one or two twisted pair (2- or 4-Wires)

Point-to-point distances up to 11 miles (17.6Km)

Remote digital loopback, local line loopback diagnostics

Internal, external or receive recovered clocking options

LED indicators for TD, RD, CTS, CD, DTR, TM, ER and NS

Fits in Patton’s 1001 2u (3.5”) rack chassis

Made in the U.S.A.

2.2 DESCRIPTION

The Patton Model 1092ARC KiloModem 2W/4WTM baseband modem allows synchronous or asynchronous data to be transmitted up to 11 miles (17.6 km) over one or two twisted pair (2 or 4 Wire). Supporting synchronous speeds up to 128 kbps and asynchronous speeds up to 38.4 kbps, the 1092ARC is perfect for LAN interconnection or high speed internet links.

To compensate for poor line quality, the Model 1092ARC supports 2B1Q encoding, Automatic Equalization, and Auto Gain Control. The 1092ARC is fully SNMP manageable using Patton’s Model 1001MC Management Card. Software configuration is performed via the VT100 screens. Swappable interface driver boards and interface cards allow the user to easily change applications between RS-232, V.35, X.21, G.703, RS-530, 10Base-T, or Ethernet. The Model 1092ARC also features convenient front panel diagnostic switches and LEDs that allow for easy setup, configuration and testing.

The Model 1092ARC is designed to fit into Patton’s 1001 2U (3.5”) high rack chassis. This chassis uses a mid-plane architecture allowing front cards to be plugged into different rear cards. Please see the Model 1001RP14 manual for more information on the power supply options.

3

4

 

Image 3
Contents User Manual CE Notice Table of ContentsWarranty Information Radio and TV InterferenceGeneral Information Service iNFORMATIONFeatures Email support@patton.com, orHTTP/HTML Management 1092A Snmp Management SolutionsConfiguration Configure the Hardware SwitchesS1 Summary Table Configuration Switch Set S1Switches S1-1 and S1-2 Data Rate Reversible Interface Driver BoardSwitch S1-8 Response to Remote Loop Request Switch S1-3 Data Set Ready During Local Line Loopback TestSwitches S1-4 Management Setting Switches S1-6 and S1-7 Transmit Clock SourceS5 Summary Table Configure the Software SwitchesMain Menu Option 3 Display Software Configuration Configure the Local 1092ARCMain Menu Option 1 Display Active Configuration Main Menu Option 2 Display Hardware ConfigurationData Format Main Menu Option 4 Setup Software ConfigurationClock Mode DTE RateDTE Controlled Local Line Loop Wire/4-Wire SelectionDSR During Local Line Loop Response to Remote Digital LoopOFF DTE Shield DB-25 Pin 1 & Frgnd JB3 Configure the Rear Interface CardInterface Card Strap Summary Table #1 Strap Function Position 1&2 Position 2&3DTE Shield DB-15 Pin 1 & Frgnd JB3 Model 1001RCM13445 Rear Card Strap SettingsModel 1001RCM11545 Rear Card Strap Settings Interface Card Strap Summary Table #2For more information InstallationRack Power Supply Model 1001R14 Rack ChassisConnect to a DCE Device Install the Model 1092ARC Series Into the ChassisWire the Model 1092ARC Series Connect to a DTE DeviceCTS Signal PIN#LED Status Indicators TD & RDTest Modes Local Line Loopback LLBRemote Digital Loopback RDL Patton Model # Description 3 V.52 BER Test Pattern GeneratorPatton Model 1092ARC Terminal Interface PIN Assignment 34F Connector-DCE InterfaceDB-25F Connector-DCE RS-232 Interface Appendix B Model 1092ARC Terminal Interface PIN AssignmentRJ45 Connector RJ-45 Connector on 1000CC CardEIA Pin Number Signal

1092ARC specifications

The Patton Electronics 1092ARC is a versatile and robust device designed for reliable communication and connectivity in various applications. As a part of Patton's extensive product portfolio, the 1092ARC stands out due to its impressive feature set and advanced technologies, making it a preferred choice for network administrators and businesses seeking durable and efficient solutions.

One of the main features of the 1092ARC is its ability to support both voice and data transmission over an extended distance. This is particularly beneficial for organizations that require unified communications while maintaining cost-effectiveness. The device is equipped with two FXO ports and two FXS ports, allowing for the seamless integration of traditional telephony systems with IP-based networks.

The 1092ARC utilizes advanced echo cancellation technology, ensuring high-quality voice transmission without delays or disturbances. This feature significantly enhances the user experience, especially during critical voice communications. The device also supports various telephony protocols, including SIP and MGCP, providing flexibility in deployment and integration with existing networks.

In terms of connectivity, the 1092ARC offers dual Ethernet ports, allowing users to easily bridge multiple networks. This capability is complemented by its support for VLAN tagging, which enhances network management and traffic segmentation. The device also features an Integrated Network Management System (INMS) for streamlined monitoring and configuration, simplifying network administration.

Another standout characteristic of the 1092ARC is its rugged construction, designed to operate in challenging environments. With a wide operating temperature range and robust form factor, this device ensures reliable performance even in extreme conditions. Its energy-efficient design contributes to lower operational costs while delivering consistent performance.

The Patton 1092ARC also prioritizes security, featuring built-in firewall capabilities and support for VPN connections. These security measures protect sensitive data and communications from unauthorized access, making it an ideal choice for businesses concerned about data integrity and privacy.

Overall, the Patton Electronics 1092ARC is a highly capable device that combines advanced features, innovative technologies, and rugged durability. Its versatility in handling both voice and data communications makes it suitable for various applications, positioning it as a valuable asset in any modern communication infrastructure.