Patton electronic 1092ARC user manual Installation, Model 1001R14 Rack Chassis, Rack Power Supply

Page 14

SGND & FRGND (JB4)

In the connected position, this strap links DB-15 pin 8 (Signal Ground) and frame ground through a 100 ohm resistor. In the open position, pin 8 is connected directly to frame ground.

JB4

Position 1&2 = SGND (Pin 8) and FRGND connected through a 100 ohm resistor

Position 2&3 = SGND (Pin 8) and FRGND directly connected

25

4.0 INSTALLATION

This section describes the functions of the Model 1001R14 rack chassis, tells how to install front and rear Model 1092ARC Series cards into the chassis, and how to connect to the twisted pair interface and the serial interface.

4.1 THE MODEL 1001R14 RACK CHASSIS

The Model 1001R14 Rack Chassis (Figure 9, below) has 16 card slots, plus its own power supply. Measuring only 3.5” high, the Model 1001R14 is designed to occupy only 2U in a 19” rack. Sturdy front handles allow the Model 1001R14 to be extracted and transported conveniently.

Figure 9: Model 1001R14 Rack Chassis with power supply

4.1.1 The Rack Power Supply

The power supply included in the Model 1001R14 rack uses the same mid-plane architecture as the modem cards. The front card of the power supply slides in from the front, and the rear card slides in from the rear. They plug into one another in the middle of the rack.

The front card is then secured by thumb screws and the rear card by conventional metal screws.

WARNING! There are no user-serviceable parts in the power supply section of the Model 1092RC Series. Voltage setting changes and fuse replacement should only be performed by qualified service personnel. Contact Patton Electronics’ Technical support at (301)975-1007

for more information.

4.2

26

Image 14
Contents User Manual Radio and TV Interference Table of ContentsWarranty Information CE NoticeEmail support@patton.com, or Service iNFORMATIONFeatures General InformationConfigure the Hardware Switches 1092A Snmp Management SolutionsConfiguration HTTP/HTML ManagementReversible Interface Driver Board Configuration Switch Set S1Switches S1-1 and S1-2 Data Rate S1 Summary TableSwitches S1-6 and S1-7 Transmit Clock Source Switch S1-3 Data Set Ready During Local Line Loopback TestSwitches S1-4 Management Setting Switch S1-8 Response to Remote Loop RequestConfigure the Software Switches S5 Summary TableMain Menu Option 2 Display Hardware Configuration Configure the Local 1092ARCMain Menu Option 1 Display Active Configuration Main Menu Option 3 Display Software ConfigurationDTE Rate Main Menu Option 4 Setup Software ConfigurationClock Mode Data FormatResponse to Remote Digital Loop Wire/4-Wire SelectionDSR During Local Line Loop DTE Controlled Local Line LoopOFF Strap Function Position 1&2 Position 2&3 Configure the Rear Interface CardInterface Card Strap Summary Table #1 DTE Shield DB-25 Pin 1 & Frgnd JB3Interface Card Strap Summary Table #2 Model 1001RCM13445 Rear Card Strap SettingsModel 1001RCM11545 Rear Card Strap Settings DTE Shield DB-15 Pin 1 & Frgnd JB3Model 1001R14 Rack Chassis InstallationRack Power Supply For more informationConnect to a DTE Device Install the Model 1092ARC Series Into the ChassisWire the Model 1092ARC Series Connect to a DCE DeviceTD & RD Signal PIN#LED Status Indicators CTSRemote Digital Loopback RDL Test ModesLocal Line Loopback LLB 3 V.52 BER Test Pattern Generator Patton Model # DescriptionAppendix B Model 1092ARC Terminal Interface PIN Assignment 34F Connector-DCE InterfaceDB-25F Connector-DCE RS-232 Interface Patton Model 1092ARC Terminal Interface PIN AssignmentEIA Pin Number Signal RJ45 ConnectorRJ-45 Connector on 1000CC Card

1092ARC specifications

The Patton Electronics 1092ARC is a versatile and robust device designed for reliable communication and connectivity in various applications. As a part of Patton's extensive product portfolio, the 1092ARC stands out due to its impressive feature set and advanced technologies, making it a preferred choice for network administrators and businesses seeking durable and efficient solutions.

One of the main features of the 1092ARC is its ability to support both voice and data transmission over an extended distance. This is particularly beneficial for organizations that require unified communications while maintaining cost-effectiveness. The device is equipped with two FXO ports and two FXS ports, allowing for the seamless integration of traditional telephony systems with IP-based networks.

The 1092ARC utilizes advanced echo cancellation technology, ensuring high-quality voice transmission without delays or disturbances. This feature significantly enhances the user experience, especially during critical voice communications. The device also supports various telephony protocols, including SIP and MGCP, providing flexibility in deployment and integration with existing networks.

In terms of connectivity, the 1092ARC offers dual Ethernet ports, allowing users to easily bridge multiple networks. This capability is complemented by its support for VLAN tagging, which enhances network management and traffic segmentation. The device also features an Integrated Network Management System (INMS) for streamlined monitoring and configuration, simplifying network administration.

Another standout characteristic of the 1092ARC is its rugged construction, designed to operate in challenging environments. With a wide operating temperature range and robust form factor, this device ensures reliable performance even in extreme conditions. Its energy-efficient design contributes to lower operational costs while delivering consistent performance.

The Patton 1092ARC also prioritizes security, featuring built-in firewall capabilities and support for VPN connections. These security measures protect sensitive data and communications from unauthorized access, making it an ideal choice for businesses concerned about data integrity and privacy.

Overall, the Patton Electronics 1092ARC is a highly capable device that combines advanced features, innovative technologies, and rugged durability. Its versatility in handling both voice and data communications makes it suitable for various applications, positioning it as a valuable asset in any modern communication infrastructure.