Patton electronic 07M2160-GS, 2160 Series Configuring the Model, Web configuration requirements

Page 31

Model 2160 Series Getting Started Guide

3 • Hardware installation

 

 

Configuring the Model 2160

There are three different ways you can configure the Model 2160: the serial console, Telnet, or a web browser.

Web configuration requirements

Make sure that the PC you use for configuration has an Ethernet adapter and TCP/IP installed.

The Model 2160 provides a browser interface that allows you to configure and manage the Ethernet Extender. After you set up the IP address for the 2160, you can access the Ethernet Extender's Web interface applications directly in your browser by entering the IP address. You can then use your Web browser to manage and config- ure the unit from a PC.

Note For detailed information on configuring the Model 2160 through the

Web interface, see Chapter 4, “Web configuration” on page 32.

Console configuration requirements

To configure the Model 2160 through the serial console, you can directly connect a terminal or a PC equipped with a terminal-emulation program (such as Hyper Terminal) to the Ethernet Extender's console port.

Use the supplied serial cable (RJ-45 to DB9F) to connect the Model 2160 to a PC. After marking the connec- tion, configure the terminal-emulation program to use the following parameters:

•9600 bps

•8 data bits

•no parity

•1 stop bit

Note For detailed information on configuring the Model 2160 through the serial console, see Chapter 5, “Console and Telnet configuration” on page 66.

Telnet configuration requirements

Make sure that the PC you use for configuration has an Ethernet adapter and TCP/IP installed. The Model 2160 supports Telnet for remote configuration. The command is “telnet 192.168.1.1” . When prompted for the username and password for remote login, use admin for username and admin for password. All display screens are the same as serial console configuration.

The default IP address is 192.168.1.1, but you may change the IP address for your application.

Note For detailed information on configuring the Model 2160 through Telnet, see Chapter 5, “Console and Telnet configuration” on page 66.

Configuring the Model 2160

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents CopperLink Model 2160 Series Mailsupport@patton.com Summary Table of Contents Table of Contents Web configuration Console and Telnet configuration Contacting Patton for assistance Port pin-outs List of Figures Model 2160 Series Getting Started Guide List of Tables Audience About this guideStructure Impaired functioning PrecautionsTected by a circuit breaker Safety when working with electricityModel 2160 first General observations Preventing Electrostatic Discharge DamageGeneral conventions Typographical conventions used in this documentGeneral information Chapter contentsModel Model 2160 overviewLAN 1-4100M Model 2160 front panelLED descriptions WAN 1-4 LinkPort descriptions Model 2160 rear panelGround terminal Reset buttonApplications overview Typical application IntroductionDistance Chart 2160 Series Standard Setting Distance chartsDistance Chart 2160 Series High Speed Setting Hardware installation Planning the installation AC Power Mains Network diagramIP related information Unpacking the Model Installing the ModelConnecting cables Location and mounting requirementsGrounding stud Grounding the Model 2160 and connecting powerTelnet configuration requirements Configuring the ModelWeb configuration requirements Console configuration requirementsWeb configuration Web configuration TCP/IP setup Setting Up the WMISystem Login Basic Configuration Options Operation mode and Mgmt portDhcp server Subnet Mask Host Name SohoLAN IP Address Subnet Mask Gateway DNS Server 1 DNS Server 2 Review and save basic setup changes Review and save basic setup changesLine Type Advanced Configuration OptionsAnnex Type Line Probe Tcpam TypeMain Rate SNR MarginVlan VID 1Q Tag-Based Vlan 802.1Q Tag-Based Vlan802.1Q Vlan Web configuration Port-Based Vlan Port-Based VlanTpid Tag Protocol Identifier Enter 33024 for IEEE802.1Q Port-Based QinQQuality of Service QoS QoS Port Based Priority Port Based PriorityQoS Vlan Tag Priority Vlan Tag PriorityDefault IP Dscp Priority Service by WRRThroughput Normal High Reliability Delay NormalStays the same link layer and routing protocol keep alive ClassQoS IP Dscp Priority Rate Control Rate ControlLine Status Status OptionsMgmt Status Security Administration Administration OptionsLAN Status Remote Management Hosts User ProfilesSnmp Administration Snmp AdministrationSnmp community pool configuration Community PoolTrap Host Pool Utility OptionsSystem Information Configuration Tool Configuration ToolLogout UpgradeRestart RestartDhcp Server Dhcp Fixed Host DNS Proxy Host Name Console and Telnet configurationConsole and Telnet configuration Log in to the console interface Log in using TelnetInterface commands Ctrl + C Quit configuring the item Ctrl +Q Access helpProduct name Line Bridge Window structureMenu tree for authorized users Main Menu TreeMain screen for authorized users Menu tree for unauthorized usersEnable Command Menu Line Setup Command MenuMaximum Main Rate Wire modelMode LinkIP Address Subnet Mask ClearDisable 802.1Q Tag Vlan Port-Based Vlan Vlan ModeSetup Command Menu Pvid QoS QoS ModeQoS Mode Weight Value Queue WeightQueue Schedule Vlan Tag Priority QoS Port-Based Priority QoSVlan Tag Index 0 1 2 3 4 5 6 Queue Index IP Dscp Priority QoSPort Line ListRate PortMgmt Dhcp Fixed Host Dhcp ServerDNS Proxy Factory DefaultHost Name Interface Status Status Command MenuInterface Config Show Command MenuWrite Command SystemPing Command Reboot CommandUser Profile Administration Command MenuModify/Add User Telnet TCP Port SecurityLegal IP Address Pool Community SnmpDenied Trap hostReadOnly ReadWriteSupervisor Password Supervisor Password and IDSupervisor ID Restore system configuration Utility Command MenuUpgrade main software Backup system configurationExit Command Contacting Patton for assistance Contact information Warranty coverageRMA numbers Out-of-warranty serviceReturns for credit Return for credit policyAppendix a Compliance information Authorized European Representative ComplianceRadio and TV interference FCC Part CE Declaration of ConformityAppendix B Specifications Line Modulation Line ConnectorEthernet Connector Management ConnectorWeight Front Panel IndicatorsPower Supply DimensionsAppendix C Port pin-outs EIA-561 RJ-45 8-pin port Console portLine CopperLink Ethernet

2160 Series, 07M2160-GS specifications

The Patton Electronic 07M2160-GS is a kind of versatile and innovative device that falls within the 2160 Series of products. This series is renowned for its robust architecture, delivering reliable performance across various telecommunications applications. The 07M2160-GS is specifically designed to provide high-quality services for businesses that require efficient data communication solutions.

One of the main features of the 07M2160-GS is its impressive ability to support multiple communication protocols, allowing seamless integration into existing network infrastructures. This versatility makes it suitable for a wide array of applications, ranging from legacy systems to modern VoIP communications. The device is equipped with advanced bridging and routing capabilities, ensuring that network traffic is efficiently managed and directed.

The 07M2160-GS also embraces a set of cutting-edge technologies that enhance its performance. It typically incorporates features such as Quality of Service (QoS) management. This technology is crucial in prioritizing essential data packets to ensure that voice and video communications are prioritized over less critical data, thus improving the overall user experience. Additionally, the device supports robust error correction algorithms, further enhancing the reliability of data transmissions.

Another characteristic that stands out in the 2160 Series is the ease of installation and configuration. The 07M2160-GS often comes with a user-friendly interface, allowing system administrators to set up and manage the device without extensive training. This ease of use is complemented by comprehensive support resources provided by Patton Electronics, ensuring that customers can troubleshoot and optimize their devices effectively.

Furthermore, the 07M2160-GS is designed with scalability in mind, making it an ideal choice for growing businesses. The modular architecture allows for easy upgrades and expansions, ensuring that organizations can adapt their communications infrastructure as their needs evolve.

In summary, the Patton Electronic 07M2160-GS offers an exemplary combination of advanced features, cutting-edge technologies, and user-friendly characteristics. This device is well-suited to meet the demands of modern telecommunications, ensuring that businesses can maintain reliable communication channels as they grow and adapt to an ever-changing digital landscape.
Top Page Image Contents