Patton electronic 4400 Connect to the RS-232 console port, Connecting to the RS-232 Console port

SmartNode 4400 Series Getting Started Guide 4 • Getting started with the SmartNode 4400 Series

Note The SmartNode CD-ROM contains a collection of third party software tools (including TFTP servers and Telnet utilities) to help you configure, operate and monitor the SmartNode device.

Connect to the RS-232 console port

The RJ-45 Console port is wired as an EIA-561, RS-232 port. Use the included Model 16F-561 adapter and cable (see figure 17) between the SmartNode’s Console port and a PC or workstation’s RS-232 serial interface. Activate the terminal emulation program on the PC or workstation that supports the serial interface

(e.g. HyperTerm).

	40V
10	0-2	Hz)
	-60	P
(510 AM

Rese t

Telco Ports

Con sole

Console port

ETH 0/0

ETH 0/1

Model 16F-561

adapter and cable

Laptop PC

Figure 17. Connecting to the RS-232 Console port

Terminal emulation program settings:

•Asynchronous

•9600 bps

•No parity

•8 bit

•1 stop bit

•No flow control

1. Configure IP address 37