Installing Optional Navisphere 6.X Software | EMC CX300, CX500

Installing Optional Navisphere 6.X Software

Installing Optional Navisphere 6.X Software

You may need to add the following software:

◆Navisphere Manager

◆Access Logix™, SnapView™, MirrorView™, SAN Copy™, or Analyzer options

To add the software, you will need to connect the laptop directly to the SP LAN port. Use the 10BaseT crossover cable that shipped with your system.

Connecting the Service Laptop to the SP LAN Port

Follow steps 1-4 to create a dedicated LAN connection between the service laptop and the storage system.

1.If necessary, connect an RJ45 adapter to the NIC card on the laptop.

2.Connect the crossover cable from the service laptop to the LAN port on SP A or SP B. Figure 11 shows this connection on a CX700 system.

LAN Cable

NIC Card

EMC229

Figure 11 Connecting the Crossover Cable (CX700 Shown)

EMC CLARiiON CX300, CX500, and CX700 Initialization Guide

29

Image 29

EMC CX300, CX500, CX700 manual Installing Optional Navisphere 6.X Software, Connecting the Service Laptop to the SP LAN Port

Contents

EMC CLARiiON CX300, CX500, and CX700 Storage Systems Initialization Guide Host Initialization Overview Requirements for Initial Setup Service Laptop Requirements Physical Modem Setting Up the Service Laptop Select Dont Detect my Modem I will select it from a list Setting Up the Dial-Up PPP Support Windows 2000 Environment Network Connection Wizard opens Setting Up Dial-Up Networking Windows 2000 EnvironmentClick Connect directly to another computer, then click Next Click Properties Click the Networking tab Highlight Dialup Networking S... and click Properties Start Settings Control Panel Modems Set the Initial speed bps to Setting Up Dial-Up Networking Windows NT 4.0 EnvironmentClick Configure Select the Server assigned IP address option Set Accept any authentication including clear text to onClear the check box Use another port if busy SP a SP B Initializing the Storage System Initialization Steps Turn the service laptop on On the laptop, select My Computer Dial-up Networking For Windows Storage Processor Networking Configuration Setup Screen SP a You will set security in a later step Network Configuration Confirmation Screen SP a On the laptop, select My Computer Dial-up Networking Storage Processor Networking Configuration Setup Screen SP B Click Apply Settings Network Configuration Confirmation Screen SP B SP Properties screen opens, as shown in Figure SP B Properties Confirm SP B SP Properties dialog box opens Setting the Port Speed Remove the Null modem cable from SP B and connect it On the laptop, select My Computer Dial-up Networking EMC CLARiiON CX300, CX500, and CX700 Initialization Guide Changing the Default Battery Test Time Setting Battery Test Time Connecting the Service Laptop to the SP LAN Port Installing Optional Navisphere 6.X Software MirrorViewUI SnapViewUI SANCopyUI AnalyzerUI Installing Software Options Storage System Properties dialog box opens 10.42.12.1002162/setup Setting Initial Security Parameters 192.168.1.1/setup Using the Serial Cable Via the Serial Port Alternate Method LAN Making Management and Switch or Host Connections Connecting the Fibre-optic Switch/Host Cables CX700 Shown Connecting a Fibre-Optic Switch or Fibre Channel Host Trademark Information Configuring Your Host Server and Storage System