Setting Up the Service Laptop
Setting Up the Dial-Up PPP Support (Windows 2000 Environment)
If Communication cable between two computers is not installed and set up, install it and set it up as follows:
1. Follow the path:
Start > Settings > Control Panel > Phone and Modem
Options
2.If your laptop has a modem, then under the Modems tab, note which port your current modem is using.
3.Click Add.
4.Select Don't Detect my Modem; I will select it from a list.
5.Click Next.
An Add/Remove Hardware Wizard dialog box opens.
6.Under the Manufacturers column, select (Standard Modem Types).
7.Under the Models column, select Communication cable between two computers.
8.Click Next.
9.When asked On which ports do you want to install it?, click Selected Ports and highlight a port which is not used by the installed modem (whose port you noted in step 1b). Note the port you select.
The default is COM 1.
10.Click Next.
11.On the next screen, click Finish.
12.Click OK.
What Next? Continue to the next section.
6
EMC CLARiiON CX300, CX500, and CX700 Initialization Guide
