EMC CX500, CX700, CX300 manual Initializing the Storage System, SP a SP B

Initializing the Storage System

Initializing the Storage System

This section describes how to set critical startup parameters on the storage system’s storage processors (SPs).

Before you begin the initialization process, have the network administrator at your facility assign IP addresses for the storage system, and complete the following worksheet. You will need this information to complete the system setup.

Table 2 Initialization Worksheet

	SP A	SP B
Hostname	__________________________	__________________________
	Up to 15 alphanumeric characters. Dashes are
	acceptable. Special characters such as dots,
	spaces, or underscores are not allowed.
	Examples: Array1-A, Array1-B.
IP Address	__________________________	__________________________
Subnet Mask	__________________________	__________________________
Gateway	__________________________	__________________________

Change Management Port settings on SP A and SP B

to EMC-specific assigned value for added security? YES____ NO____

12

EMC CLARiiON CX300, CX500, and CX700 Initialization Guide