Manuals / EMC / Portable Media / Storage

EMC CX700, CX500, CX300 manual Storage System Properties dialog box opens

Models: CX700 CX500 CX300

1 36

Download 36 pages 19.97 Kb

Page 31

Installing Optional Navisphere 6.X Software

SnapView, MirrorView, and SAN Copy drivers will not install unless Access Logix is already installed on the storage system.

Systems that use SnapView require admsnap host management utility software and systems that use SAN Copy require the admhost management utility software. When you configure your storage system hosts, remember to install admsnap (SnapView) or admhost (SAN Copy) from the CD-ROM to each host that will use the storage system.

3.In Navisphere Manager, from the Software tab, right-click the icon for the storage system that contains the software packages you installed in step 1 and select Properties.

The Storage System Properties dialog box opens.

4.Select any software packages that have a (commit required) specification next to its Status and click COMMIT.

Some features may not be available until you commit the software.

EMC CLARiiON CX300, CX500, and CX700 Initialization Guide

31

Image 31

EMC CX700, CX500, CX300 manual Storage System Properties dialog box opens

Contents

EMC CLARiiON CX300, CX500, and CX700 Storage Systems Initialization GuideHost Initialization OverviewRequirements for Initial Setup Service Laptop Requirements Physical Modem Setting Up the Service LaptopSelect Dont Detect my Modem I will select it from a list Setting Up the Dial-Up PPP Support Windows 2000 EnvironmentClick Properties Setting Up Dial-Up Networking Windows 2000 EnvironmentNetwork Connection Wizard opens Click Connect directly to another computer, then click NextClick the Networking tab Highlight Dialup Networking S... and click Properties Start Settings Control Panel ModemsClick Configure Setting Up Dial-Up Networking Windows NT 4.0 EnvironmentSet the Initial speed bps to Clear the check box Use another port if busy Set Accept any authentication including clear text to onSelect the Server assigned IP address option SP a SP B Initializing the Storage SystemInitialization Steps Turn the service laptop onOn the laptop, select My Computer Dial-up Networking For WindowsStorage Processor Networking Configuration Setup Screen SP a You will set security in a later step Network Configuration Confirmation Screen SP a On the laptop, select My Computer Dial-up Networking Storage Processor Networking Configuration Setup Screen SP B Click Apply Settings Network Configuration Confirmation Screen SP B SP Properties screen opens, as shown in Figure SP B Properties Confirm SP B SP Properties dialog box opensSetting the Port Speed Remove the Null modem cable from SP B and connect it On the laptop, select My Computer Dial-up Networking EMC CLARiiON CX300, CX500, and CX700 Initialization Guide Changing the Default Battery Test Time Setting Battery Test TimeConnecting the Service Laptop to the SP LAN Port Installing Optional Navisphere 6.X SoftwareMirrorViewUI SnapViewUI SANCopyUI AnalyzerUI Installing Software OptionsStorage System Properties dialog box opens 10.42.12.1002162/setup Setting Initial Security Parameters192.168.1.1/setup Using the Serial Cable Via the Serial Port Alternate MethodLAN Making Management and Switch or Host ConnectionsConnecting the Fibre-optic Switch/Host Cables CX700 Shown Connecting a Fibre-Optic Switch or Fibre Channel HostTrademark Information Configuring Your Host Server and Storage System