Patton electronic 4630 Series manual SmartNode 4630 overview

SmartNode 4630 Getting Started Guide 1 • General information

SmartNode 4630 overview

The SmartNode 4630 ISDN S0 VoIP Gateway-Router (see figure 1) combines IP routing, VPN/Security, and Quality of Service with high-quality Voice over IP (VoIP) delivered on five ISDN S0 (S/T) Basic Rate Interface (BRI). This combination allows you to leverage low-cost Internet Telephony on existing ISDN Phones and PBX equipment for complete SoHo and branch office voice and data connectivity.

Figure 1. SmartNode 4630

The SmartNode 4630 series consists of two models: the SN4634 and SN4638. Both models come equipped with two 10/100Base-T Ethernet ports.

The SmartNode 4638 Gateway-Router performs the following major functions:

•Eight channels of Voice over IP and local voice switching via 5 ISDN BRI S0 ports. Each port can be switched between NT and TE per software. One port can be used a clock source.

•For each ISDN S0 port in NT mode a Phantom power supply can be switched on. The total delivered power is 4W.

•A fallback cut-through relay between ISDN BRI ports 0/0 and 0/1 electrically connects the NT and TE port in case of power failure and enables life-line calls to the public ISDN network (PSTN-supplied ISDN line must be used).

•Standard compliant VoIP in accordance with SIP or H.323 protocols.

•Internet access and IP Routing with IP Quality of Service (QoS) support for mixed voice and data traffic. The SN4634 is the same as the SN4638 except that it supports 3 ISDN BRI S0 ports and 4 VoIP channels.

SmartNode 4630 overview 14