TP-Link TL-WA601G manual Network, Wireless

Page 17

TL-WA601G108M Wireless Access Point User Guide

3.3Network

You can configure the IP parameters of Network on this page.

Figure 3-4 Network

¾Type - Choosing dynamic IP to get IP address from DHCP server, or choosing static IP to config IP address manually.

¾IP Address - Enter the IP address of your AP in dotted-decimal notation (factory default: 192.168.1.1).

¾Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask.

¾Gateway - The gateway should be in the same subnet as your IP address.

¾MAC Address - the physical address of the AP, as seen from the LAN. The value can't be changed.

)Note:

If you change the IP Address, you must use the new IP Address to login the AP.

If the new LAN IP Address you set is not in the same subnet, the IP Address pool in the DHCP sever will not take effect, until they are re-configured.

3.4Wireless

Figure 3-5 The Wireless menu

There are five submenus under the Wireless menu (shown in Figure 3-5): Basic Settings, Wireless mode, Security Settings, MAC Filtering and Wireless Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

11

Image 17

Contents TL-WA601G Copyright & Trademarks FCC Statement Required Contents Appendix a Glossary Appendix B Specifications Appendix C FAQ Package Contents Product Overview Main FeaturesIntroduction Conventions Hardware InstallationFront Panel LED ExplanationSystem Requirements Installation Environment RequirementsBack Panel Configure PC Connecting the DeviceTL-WA601G108M Wireless Access Point User Guide Configure the IP address manually. Click OK If the connection between your PC and the AP is correct? Login Software ConfigurationMAC address, IP address and Subnet Mask StatusNetwork WirelessBasic Settings Wireless Mode Wireless Mode Settings TL-WA601G108M Wireless Access Point User Guide TL-WA601G108M Wireless Access Point User Guide TL-WA601G108M Wireless Access Point User Guide Site Survey Security Settings TL-WA601G108M Wireless Access Point User Guide TL-WA601G MAC FilteringTo modify or delete an existing entry 14 Add or Modify Wireless MAC Address Filtering entryFor example Dhcp Wireless Statistics17 Dhcp Settings Dhcp SettingsAddress Reservation Dhcp Clients ListTo Reserve IP addresses Wireless SettingsTo modify a Reserved IP address To delete all Reserved IP addressesFirmware System Tools22 Firmware Upgrade Factory DefaultsReboot Backup & RestoreSyslog PasswordTL-WA601G108M Wireless Access Point User Guide Appendix a Glossary TL-WA601G108M Wireless Access Point User Guide Physical and Environment Appendix B SpecificationsWireless No lights are lit on the access point Appendix C FAQCannot access the AP with a wireless capable computer LAN light is not lit