TP-Link TL-WA601G manual Dhcp, Wireless Statistics

Page 30

TL-WA601G

108M Wireless Access Point User Guide

)Note:

If you select the radio button Allow the stations not specified by any enabled entries in the list to access for Filtering Rules, the wireless station B will still not be able to access the AP, however, other wireless stations that are not in the list will be able to access the AP.

If you enable the function and select the Deny the stations not specified by any enabled entries in the list to access for Filtering Rules, and there are not any enable entries in the list, thus, no wireless stations can access the AP.

3.4.6 Wireless Statistics

This page shows MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless station.

Figure 3-15 The AP attached wireless stations

¾MAC Address - The connected wireless station's MAC address

¾Current Status - The connected wireless station's running status, one of STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnected

¾Received Packets - packets received by the station

¾Sent Packets - packets sent by the station

You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button.

If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page.

)Note:

This page will be refreshed automatically every 5 seconds.

3.5DHCP

Figure 3-16 The DHCP menu

24

Page 29 Page 31
Image 30
Page 29 Page 31
Contents TL-WA601G Copyright & Trademarks FCC Statement Required Contents Appendix a Glossary Appendix B Specifications Appendix C FAQ Package Contents Main Features IntroductionProduct Overview Front Panel Hardware InstallationConventions LED ExplanationInstallation Environment Requirements Back PanelSystem Requirements Connecting the Device Configure PCTL-WA601G108M Wireless Access Point User Guide Configure the IP address manually. Click OK If the connection between your PC and the AP is correct? Software Configuration LoginStatus MAC address, IP address and Subnet MaskWireless NetworkBasic Settings Wireless Mode Wireless Mode Settings TL-WA601G108M Wireless Access Point User Guide TL-WA601G108M Wireless Access Point User Guide TL-WA601G108M Wireless Access Point User Guide Site Survey Security Settings TL-WA601G108M Wireless Access Point User Guide MAC Filtering TL-WA601G14 Add or Modify Wireless MAC Address Filtering entry To modify or delete an existing entryFor example Wireless Statistics DhcpDhcp Settings 17 Dhcp SettingsDhcp Clients List Address ReservationTo modify a Reserved IP address Wireless SettingsTo Reserve IP addresses To delete all Reserved IP addressesSystem Tools FirmwareFactory Defaults 22 Firmware UpgradeBackup & Restore RebootPassword SyslogTL-WA601G108M Wireless Access Point User Guide Appendix a Glossary TL-WA601G108M Wireless Access Point User Guide Appendix B Specifications WirelessPhysical and Environment Cannot access the AP with a wireless capable computer Appendix C FAQNo lights are lit on the access point LAN light is not lit
Top Page Image Contents