TP-Link TL-WA601G manual Basic Settings

Page 18

TL-WA601G108M Wireless Access Point User Guide

3.4.1 Basic Settings

The basic settings for the wireless network are set on this page, Figure 3-6:

Figure 3-6 Wireless Settings

¾SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all wireless devices in your network. The default SSID is TP-LINK_xxxxxx (xxxxxx indicates the last unique six characters of each device's MAC address), which can ensure your wireless network security. But it is recommended strongly that you change your networks name (SSID) to a different value. This value is case-sensitive. For example, TP-LINKis NOT the same as tp-link.

¾Channel - This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.

¾Mode - Select the desired wireless mode. The options are:

•108Mbps (Dynamic) - Super G™, 802.11g and 802.11b wireless stations can connect to the AP.

•108Mbps (Static) - Only Super G™ wireless stations can connect to the AP.

•54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can connect to the AP.

•11Mbps (802.11b) - Only 802.11b wireless stations can connect to the AP.

¾Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the AP can be used. If your country or region is not listed, please contact your local government agency for assistance.

The default region is United States. When you select your local region from the pull-down list, the dialog shown in Figure appears below. Click OK.

12

Image 18

Contents TL-WA601G Copyright & Trademarks FCC Statement Required Contents Appendix a Glossary Appendix B Specifications Appendix C FAQ Package Contents Main Features IntroductionProduct Overview Front Panel Hardware InstallationConventions LED ExplanationInstallation Environment Requirements Back PanelSystem Requirements Connecting the Device Configure PCTL-WA601G108M Wireless Access Point User Guide Configure the IP address manually. Click OK If the connection between your PC and the AP is correct? Software Configuration LoginStatus MAC address, IP address and Subnet MaskWireless NetworkBasic Settings Wireless Mode Wireless Mode Settings TL-WA601G108M Wireless Access Point User Guide TL-WA601G108M Wireless Access Point User Guide TL-WA601G108M Wireless Access Point User Guide Site Survey Security Settings TL-WA601G108M Wireless Access Point User Guide MAC Filtering TL-WA601G14 Add or Modify Wireless MAC Address Filtering entry To modify or delete an existing entryFor example Wireless Statistics DhcpDhcp Settings 17 Dhcp SettingsDhcp Clients List Address ReservationTo modify a Reserved IP address Wireless SettingsTo Reserve IP addresses To delete all Reserved IP addressesSystem Tools FirmwareFactory Defaults 22 Firmware UpgradeBackup & Restore RebootPassword SyslogTL-WA601G108M Wireless Access Point User Guide Appendix a Glossary TL-WA601G108M Wireless Access Point User Guide Appendix B Specifications WirelessPhysical and Environment Cannot access the AP with a wireless capable computer Appendix C FAQNo lights are lit on the access point LAN light is not lit