TP-Link TL-WA601G manual Site Survey

Page 24

TL-WA601G108M Wireless Access Point User Guide

and printers with any other PCs or servers connected to any of the three LAN segments.

•Wireless stations will not be able to connect to the TL-WA601G Access Points in the illustration above. If you require wireless stations to access any LAN segment, you can add TL-WA601G Access Points configured in Wireless Access Point mode to any LAN segment.

)Note:

You can extend this multi-point bridging by adding additional TL-WA601Gs configured in Point-to-Point mode for each additional LAN segment. Furthermore, you can extend the range of the wireless network with wireless antenna accessories.

3.4.3 Site Survey

After selecting a mode and pressing button Survey, you can view all of APs around you.

Figure 3-11 Site Survey

¾SSID - The SSID of the AP.

¾BSSID - The BSSID of the AP, usually also the MAC address of the AP.

¾Signal - The signal received from the AP.

¾Channel - The channel the AP works in.

¾Security - The AP communicates in privacy.

¾Choose - Choose one AP from list to connect to.

Press one of Connect in list to select an AP to connect to. Then the basic settings will show again. You can save settings and reboot to take effective.

)Note:

If wireless is disabled, surveying can’t work. And if Access Point mode is selected, there is no reason and no choice to connect to another AP, as it showed below.

18

Page 23 Page 25
Image 24
Page 23 Page 25
Contents TL-WA601G Copyright & Trademarks FCC Statement Required Contents Appendix a Glossary Appendix B Specifications Appendix C FAQ Package Contents Main Features IntroductionProduct Overview Hardware Installation ConventionsFront Panel LED ExplanationInstallation Environment Requirements Back PanelSystem Requirements Connecting the Device Configure PCTL-WA601G108M Wireless Access Point User Guide Configure the IP address manually. Click OK If the connection between your PC and the AP is correct? Software Configuration LoginStatus MAC address, IP address and Subnet MaskWireless NetworkBasic Settings Wireless Mode Wireless Mode Settings TL-WA601G108M Wireless Access Point User Guide TL-WA601G108M Wireless Access Point User Guide TL-WA601G108M Wireless Access Point User Guide Site Survey Security Settings TL-WA601G108M Wireless Access Point User Guide MAC Filtering TL-WA601G14 Add or Modify Wireless MAC Address Filtering entry To modify or delete an existing entryFor example Wireless Statistics DhcpDhcp Settings 17 Dhcp SettingsDhcp Clients List Address ReservationWireless Settings To Reserve IP addressesTo modify a Reserved IP address To delete all Reserved IP addressesSystem Tools FirmwareFactory Defaults 22 Firmware UpgradeBackup & Restore RebootPassword SyslogTL-WA601G108M Wireless Access Point User Guide Appendix a Glossary TL-WA601G108M Wireless Access Point User Guide Appendix B Specifications WirelessPhysical and Environment Appendix C FAQ No lights are lit on the access pointCannot access the AP with a wireless capable computer LAN light is not lit
Top Page Image Contents