TP-Link TL-WA601G manual MAC Filtering

Page 27

TL-WA601G

108M Wireless Access Point User Guide

2)WPA-PSK - Pre-shared key of WPA.

3)WPA2-PSK - Pre-shared key of WPA2.

•PSK Passphrase - You can enter a passphrase between 8 and 63 characters long.

•Group Key Update Period - Specify the group key update interval in seconds. The value can be either 0 or at least 30. Enter 0 to disable the update.

Be sure to click the Save button to save your settings on this page.

)Note:

The AP will reboot automatically after you click the Save button.

3.4.5 MAC Filtering

The Wireless MAC Filtering for wireless networks is set on this page, Figure 3-13:

Figure 3-13 Wireless MAC address Filtering

The Wireless MAC Address Filtering feature allows you to control wireless stations accessing the AP, which depend on the station's MAC addresses.

¾MAC Address - The wireless station's MAC address that you want to access.

¾Description - A simple description of the wireless station.

¾Privilege - Allow means allowing the station to access the AP. Deny means denying the station to access the AP. 64-bit,or 128-bit,or 152-bitmeans assigning a unique WEP key to access the AP.

¾WEP Key - Specify a unique WEP key (in Hexadecimal format) to access the AP.

¾Status - The status of this entry, either Enabled or Disabled.

To disable the Wireless MAC Address Filters feature, keep the default setting, Disable.

To set up an entry, click Enable, and follow these instructions:

Step1：First, you must decide whether the unspecified wireless stations can or cannot access the AP. If you desire that the unspecified wireless stations can access the AP, please select

21

Page 26 Page 28
Image 27
Page 26 Page 28
Contents TL-WA601G Copyright & Trademarks FCC Statement Required Contents Appendix a Glossary Appendix B Specifications Appendix C FAQ Package Contents Main Features IntroductionProduct Overview LED Explanation Hardware InstallationConventions Front PanelInstallation Environment Requirements Back PanelSystem Requirements Configure PC Connecting the DeviceTL-WA601G108M Wireless Access Point User Guide Configure the IP address manually. Click OK If the connection between your PC and the AP is correct? Login Software ConfigurationMAC address, IP address and Subnet Mask StatusNetwork WirelessBasic Settings Wireless Mode Wireless Mode Settings TL-WA601G108M Wireless Access Point User Guide TL-WA601G108M Wireless Access Point User Guide TL-WA601G108M Wireless Access Point User Guide Site Survey Security Settings TL-WA601G108M Wireless Access Point User Guide TL-WA601G MAC FilteringTo modify or delete an existing entry 14 Add or Modify Wireless MAC Address Filtering entryFor example Dhcp Wireless Statistics17 Dhcp Settings Dhcp SettingsAddress Reservation Dhcp Clients ListTo delete all Reserved IP addresses Wireless SettingsTo Reserve IP addresses To modify a Reserved IP addressFirmware System Tools22 Firmware Upgrade Factory DefaultsReboot Backup & RestoreSyslog PasswordTL-WA601G108M Wireless Access Point User Guide Appendix a Glossary TL-WA601G108M Wireless Access Point User Guide Appendix B Specifications WirelessPhysical and Environment LAN light is not lit Appendix C FAQNo lights are lit on the access point Cannot access the AP with a wireless capable computer
Top Page Image Contents