TP-Link TL-WA601G manual System Tools, Firmware

Page 34

TL-WA601G108M Wireless Access Point User Guide

¾RTS threshold - RTS/CTS Threshold, the packet size that is used to determine if RTS/CTS should be sent.

¾Fragmentation threshold - The maximum packet size used for fragmentation.

¾Beacon Interval - The interval time between two successive beacons.

¾Power - The transmit power of the access point.

)Note:

Limited by local law regulations, version for North America does not have power selection option. The wireless advanced settings for this version are shown below.

)Note:

The AP will reboot automatically after you click the Save button.

3.7System Tools

Figure 3-21 The System Tools menu

There are five submenus under the System Tools menu (shown in Figure 3-21):Firmware, Factory Defaults, Reboot, Password, and Syslog. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

3.7.1 Firmware

The page (shown in Figure 3-22)allows you to upgrade the latest version of firmware for the AP.

28

Image 34

Contents TL-WA601G Copyright & Trademarks FCC Statement Required Contents Appendix a Glossary Appendix B Specifications Appendix C FAQ Package Contents Introduction Main FeaturesProduct Overview Front Panel Hardware InstallationConventions LED ExplanationBack Panel Installation Environment RequirementsSystem Requirements Connecting the Device Configure PCTL-WA601G108M Wireless Access Point User Guide Configure the IP address manually. Click OK If the connection between your PC and the AP is correct? Software Configuration LoginStatus MAC address, IP address and Subnet MaskWireless NetworkBasic Settings Wireless Mode Wireless Mode Settings TL-WA601G108M Wireless Access Point User Guide TL-WA601G108M Wireless Access Point User Guide TL-WA601G108M Wireless Access Point User Guide Site Survey Security Settings TL-WA601G108M Wireless Access Point User Guide MAC Filtering TL-WA601G14 Add or Modify Wireless MAC Address Filtering entry To modify or delete an existing entryFor example Wireless Statistics DhcpDhcp Settings 17 Dhcp SettingsDhcp Clients List Address ReservationTo modify a Reserved IP address Wireless SettingsTo Reserve IP addresses To delete all Reserved IP addressesSystem Tools FirmwareFactory Defaults 22 Firmware UpgradeBackup & Restore RebootPassword SyslogTL-WA601G108M Wireless Access Point User Guide Appendix a Glossary TL-WA601G108M Wireless Access Point User Guide Wireless Appendix B SpecificationsPhysical and Environment Cannot access the AP with a wireless capable computer Appendix C FAQNo lights are lit on the access point LAN light is not lit