Polycom DOC2558C manual Component Description

Page 17

Polycom RMX 2000 Hardware Guide

Table 1-5Polycom RMX 2000 Component Description (Continued)

Component	Description

Multi Processor	The MPM+ cards, perform the various RTP, audio and
Module+ (MPM+)	video processing functions on the RMX 2000 unit. TI
Card	C6455 processors are at the core of each MPM+ card
	which are available in the following assemblies:
	• MPM+20 (20 CIF resources)
	• MPM+40 (40 CIF resources)
	• MPM+80 (80 CIF resources)
	Notes:
	• The MPM+ card(s) can only work with software
		version 4.0 or above. Ensure that software
		appropriate to the MCU hardware configuration is
		installed in the MCU.
	• The MPM+ card can work only with a new
		environmentally friendly D-type chassis and is
		disabled when inserted in a C-type chassis.

Multi Processor	The MPMx cards, perform the various RTP, audio and
Modulex (MPMx)	video processing functions on the RMX 2000 unit. TI
Card	processors are at the core of each MPMx card which are
	available in the following assemblies:
	•	MPMx -S
	•	MPMx -D
	Notes:
	• The MPM+ card(s) can only work with software
		version 7.0 or above. Ensure that software
		appropriate to the MCU hardware configuration is
		installed in the MCU.
	• The MPM+ card can work only with a new
		environmentally friendly D-type chassis and is
		disabled when inserted in a C-type chassis.

1-11

Image 17

Contents Polycom RMX 2000 Hardware Guide USA United States Federal Communication Commission FCC Regulatory NoticesChinese Communication Certificate Singapore Certificate Table of Contents MCU Installing the Replacement MPM/MPM+/MPMx CardHardware Description Main FeaturesRMX 2000 Specifications Conferencing Capacities RMX 2000 System CapacitiesSystem Functions MPM Mode MPM+ Mode MPMx Mode MPM+ Resource CapacitiesVSW 2Mb 160 VSW 4Mb VSW 6Mb Site Requirements Safety RequirementsRack Mount Safety Precautions Installation Precautions RMX 2000 Front Panel RMX 2000 ComponentsCntl CPU Component DescriptionComponent Description RTM IP RMX 2000 Rear PanelManagement Network on page G-1 Following items appear on the RMX 2000 rear panelLAN port RTM IsdnCables Connected to the RTM IP & Isdn Cards All external connectors are located on the rear panelMPMx MPM/MPM+ and MPMx Media CardsResource Type Maximum Possible Resources Per Card Card Resources Bandwidth Type MPM+ Resource Capacities per Card Type AssemblyHD720p HD1080p @30fps @60fps MPM+ Up toMPMx, MPM+ and MPM Modes MPMx Resource Capacities per Card AssemblyAudio algorithm is not supported with MPMx Resource Type MPMx S MPMx DMPM+ MPMx Only AllMPM MPMx Only Both MPM cards are enabled An RMX has two MPM cards installedInserted MPMx card is enabled Remove one MPM card Insert one MPMx cardAn RMX has one MPMx card installed Remaining MPM card is disabledMPMx card is enabled Inserted MPM card is disabledRMX 2000 Front Panel LEDs RMX 2000 LEDsFollowing items appear on the RMX 2000 front panel ComponentCard Insertion Initiated If during Card removal Initiated The cardCntl Unit LED Color Description Name RMX 2000 Rear Panel LEDsFollowing LEDs appear on the RTM IP card ShMG LEDs Function Name Following LEDs appear on the RTM IsdnRMX 2000 General Information dialog box opens RMX Chassis TypesComponent Replacement Types of Ejector Levers on RMX Components Fully Open The card is released from the MCU housingReplacing the Cntl Module Hardware Description Replacing the Power Supply Module Replacing the Fan Drawer Removing the MPM/MPM+/MPMx Card from the MCU Replacing a Faulty MPM/MPM+/MPMx CardInstalling the Replacement MPM/MPM+/MPMx Card Installing a New MPM/MPM+/MPMx Card in a Powered On RMXReplacing a RTM Isdn Card PRI Cables Replacing the RTM IP Card