Polycom DOC2558C manual Hardware Description, Main Features

Page 7

1

Hardware Description

This Hardware Guide provides information on the RMX 2000 and its components. This system utilizes a modular “universal slot” platform, whose components are designed for high performance, capacity and reliance.

Main Features

The Polycom RMX 2000 offers the following features:

•Linux® based

•Chassis based on the ATCA standard

•Support for standard network interfaces (IP, ISDN and LAN) and large number of ports.

•H.323, SIP video, PSTN and ISDN

•New hardware technologies

•Telco grade high availability, redundancy, on-line upgrading and dynamic resource allocation

•Easy integration of conference elements into external network management

•Enhanced Continuous Presence (multi-image video)

•IVR (Interactive Voice Response) module

Image 7

Contents Polycom RMX 2000 Hardware Guide USA United States Federal Communication Commission FCC Regulatory NoticesChinese Communication Certificate Singapore Certificate Table of Contents MCU Installing the Replacement MPM/MPM+/MPMx CardHardware Description Main FeaturesRMX 2000 Specifications Conferencing Capacities RMX 2000 System CapacitiesSystem Functions MPM Mode MPM+ Mode MPMx Mode MPM+ Resource CapacitiesVSW 2Mb 160 VSW 4Mb VSW 6Mb Rack Mount Safety Precautions Safety RequirementsSite Requirements Installation Precautions RMX 2000 Front Panel RMX 2000 ComponentsCntl CPU Component DescriptionComponent Description RTM IP RMX 2000 Rear PanelManagement Network on page G-1 Following items appear on the RMX 2000 rear panelLAN port RTM IsdnCables Connected to the RTM IP & Isdn Cards All external connectors are located on the rear panelResource Type Maximum Possible Resources Per Card MPM/MPM+ and MPMx Media CardsMPMx Up to MPM+ Resource Capacities per Card Type AssemblyCard Resources Bandwidth Type HD720p HD1080p @30fps @60fps MPM+Resource Type MPMx S MPMx D MPMx Resource Capacities per Card AssemblyMPMx, MPM+ and MPM Modes Audio algorithm is not supported with MPMxMPM MPMx Only AllMPM+ MPMx Only Remove one MPM card Insert one MPMx card An RMX has two MPM cards installedBoth MPM cards are enabled Inserted MPMx card is enabledInserted MPM card is disabled Remaining MPM card is disabledAn RMX has one MPMx card installed MPMx card is enabledComponent RMX 2000 LEDsRMX 2000 Front Panel LEDs Following items appear on the RMX 2000 front panelCard Insertion Initiated If during Card removal Initiated The cardCntl Unit Following LEDs appear on the RTM IP card RMX 2000 Rear Panel LEDsLED Color Description Name ShMG LEDs Function Name Following LEDs appear on the RTM IsdnRMX 2000 General Information dialog box opens RMX Chassis TypesComponent Replacement Types of Ejector Levers on RMX Components Fully Open The card is released from the MCU housingReplacing the Cntl Module Hardware Description Replacing the Power Supply Module Replacing the Fan Drawer Removing the MPM/MPM+/MPMx Card from the MCU Replacing a Faulty MPM/MPM+/MPMx CardInstalling the Replacement MPM/MPM+/MPMx Card Installing a New MPM/MPM+/MPMx Card in a Powered On RMXReplacing a RTM Isdn Card PRI Cables Replacing the RTM IP Card