Polycom DOC2558C manual PRI Cables

Page 44

Chapter 1- Hardware Description

6Slide in the replacement RTM ISDN card.

7Insert the card into the slot until the ejector levers touch the front edge of the card cage.

8Push the ejector levers to their fully closed position.

9Tighten the captive screws on each side of the rear panel of the card, securing the RTM ISDN card to RMX.

10Turn ON the RMX 2000.

11Connect the RJ-45 terminated PRI cables into any of the slots labeled PRI1 - PRI12:

LAN	PRI Cables
	Power

7 E1 or 9 T1 cables can be connected to each RTM ISDN card, up to a total of 14 E1 or 18 T1 PRI cables when two RTM ISDN cards are installed.

1-38

Image 44

Contents Polycom RMX 2000 Hardware Guide USA Regulatory Notices United States Federal Communication Commission FCCChinese Communication Certificate Singapore Certificate Table of Contents Installing the Replacement MPM/MPM+/MPMx Card MCUMain Features Hardware DescriptionRMX 2000 Specifications RMX 2000 System Capacities Conferencing CapacitiesSystem Functions MPM Mode MPM+ Mode MPMx Mode Resource Capacities MPM+VSW 2Mb 160 VSW 4Mb VSW 6Mb Site Requirements Safety RequirementsRack Mount Safety Precautions Installation Precautions RMX 2000 Components RMX 2000 Front PanelComponent Description Cntl CPUComponent Description RMX 2000 Rear Panel RTM IPFollowing items appear on the RMX 2000 rear panel Management Network on page G-1RTM Isdn LAN portAll external connectors are located on the rear panel Cables Connected to the RTM IP & Isdn CardsMPMx MPM/MPM+ and MPMx Media CardsResource Type Maximum Possible Resources Per Card MPM+ Resource Capacities per Card Type Assembly Card Resources Bandwidth TypeHD720p HD1080p @30fps @60fps MPM+ Up toMPMx Resource Capacities per Card Assembly MPMx, MPM+ and MPM ModesAudio algorithm is not supported with MPMx Resource Type MPMx S MPMx DMPM+ MPMx Only AllMPM MPMx Only An RMX has two MPM cards installed Both MPM cards are enabledInserted MPMx card is enabled Remove one MPM card Insert one MPMx cardRemaining MPM card is disabled An RMX has one MPMx card installedMPMx card is enabled Inserted MPM card is disabledRMX 2000 LEDs RMX 2000 Front Panel LEDsFollowing items appear on the RMX 2000 front panel ComponentCard removal Initiated The card Card Insertion Initiated If duringCntl Unit LED Color Description Name RMX 2000 Rear Panel LEDsFollowing LEDs appear on the RTM IP card ShMG LEDs Following LEDs appear on the RTM Isdn Function NameRMX Chassis Types RMX 2000 General Information dialog box opensComponent Replacement Fully Open The card is released from the MCU housing Types of Ejector Levers on RMX ComponentsReplacing the Cntl Module Hardware Description Replacing the Power Supply Module Replacing the Fan Drawer Replacing a Faulty MPM/MPM+/MPMx Card Removing the MPM/MPM+/MPMx Card from the MCUInstalling a New MPM/MPM+/MPMx Card in a Powered On RMX Installing the Replacement MPM/MPM+/MPMx CardReplacing a RTM Isdn Card PRI Cables Replacing the RTM IP Card