Polycom DOC2558C manual Card removal Initiated The card, Card Insertion Initiated If during

Polycom RMX 2000 Hardware Guide

Table 1-1RMX 2000 Front Panel LED’s (Continued)

Component	LED ID	LED Color	Description
MPM/MPM+	ERR	Red	ON - Major error on card.
Card			Flashes - During card startup.
	RDY	Green	ON - The card has completed
			startup successfully.
			Flashes - During card startup.
	ACT	Amber	ON - At least one participant is
			connected to a conference.
			Flashes - During card startup.
	HS	Blue	Flashes - Shut down process
			initiated by lightly pulling the CPU
			ejector levers. This LED flashes in
			synchronization with the CNTL’s
			card’s HS LED.
			ON - Card is in a power down
			mode.
			Card removal Initiated - The card
			can be removed safely once the
			CPU ejector levers are fully open.
			Card Insertion Initiated - If during
			the startup phase the blue HS LED
			remains lit, please ensure that the
			card is properly seated in the
			chassis. If this problem persists,
			contact your next level of support.

1-23