Polycom DOC2558C manual Hardware Description

Page 38

Chapter 1- Hardware Description

5On the CNTL Module to be installed, move the ejector lever to the fully open position.

6Slide in the replacement CNTL Module.

7Push the CNTL Module firmly into the Backplane, making sure it is properly seated in its slot.

8Ensure that the metal ejector levers are fully retracted into their housings.

9Tighten the captive screws on the front panel of the RMX 2000 that secure the Functional CNTL Module.

10Turn ON the RMX 2000.

For more information on the Card Configuration Modes after reset, see "MPM/ MPM+ and MPMx Media Cards” on page 1-16.

1-32

Image 38

Contents Polycom RMX 2000 Hardware Guide USA Regulatory Notices United States Federal Communication Commission FCCChinese Communication Certificate Singapore Certificate Table of Contents Installing the Replacement MPM/MPM+/MPMx Card MCUMain Features Hardware DescriptionRMX 2000 Specifications RMX 2000 System Capacities Conferencing CapacitiesSystem Functions MPM Mode MPM+ Mode MPMx Mode Resource Capacities MPM+VSW 2Mb 160 VSW 4Mb VSW 6Mb Site Requirements Safety RequirementsRack Mount Safety Precautions Installation Precautions RMX 2000 Components RMX 2000 Front PanelComponent Description Cntl CPUComponent Description RMX 2000 Rear Panel RTM IPFollowing items appear on the RMX 2000 rear panel Management Network on page G-1RTM Isdn LAN portAll external connectors are located on the rear panel Cables Connected to the RTM IP & Isdn CardsMPMx MPM/MPM+ and MPMx Media CardsResource Type Maximum Possible Resources Per Card HD720p HD1080p @30fps @60fps MPM+ MPM+ Resource Capacities per Card Type AssemblyCard Resources Bandwidth Type Up toAudio algorithm is not supported with MPMx MPMx Resource Capacities per Card AssemblyMPMx, MPM+ and MPM Modes Resource Type MPMx S MPMx DMPM+ MPMx Only AllMPM MPMx Only Inserted MPMx card is enabled An RMX has two MPM cards installedBoth MPM cards are enabled Remove one MPM card Insert one MPMx cardMPMx card is enabled Remaining MPM card is disabledAn RMX has one MPMx card installed Inserted MPM card is disabledFollowing items appear on the RMX 2000 front panel RMX 2000 LEDsRMX 2000 Front Panel LEDs ComponentCard removal Initiated The card Card Insertion Initiated If duringCntl Unit LED Color Description Name RMX 2000 Rear Panel LEDsFollowing LEDs appear on the RTM IP card ShMG LEDs Following LEDs appear on the RTM Isdn Function NameRMX Chassis Types RMX 2000 General Information dialog box opensComponent Replacement Fully Open The card is released from the MCU housing Types of Ejector Levers on RMX ComponentsReplacing the Cntl Module Hardware Description Replacing the Power Supply Module Replacing the Fan Drawer Replacing a Faulty MPM/MPM+/MPMx Card Removing the MPM/MPM+/MPMx Card from the MCUInstalling a New MPM/MPM+/MPMx Card in a Powered On RMX Installing the Replacement MPM/MPM+/MPMx CardReplacing a RTM Isdn Card PRI Cables Replacing the RTM IP Card