Polycom DOC2558C manual Installing a New MPM/MPM+/MPMx Card in a Powered On RMX

Page 42

Chapter 1- Hardware Description

5Carefully slide the MPM/MPM+/MPMx card out through the front panel.

Installing the Replacement MPM/MPM+/MPMx Card

1On the card to be installed, move the ejector levers to their fully open position.

2Slide in the replacement MPM/MPM+/MPMx card.

3Push the MPM/MPM+/MPMx card firmly into the Backplane, making sure it is properly seated in its slot.

4Ensure that the metal ejector levers are fully retracted into their housings.

5Tighten the captive screws on the front panel of the RMX that secure the MPM/MPM+/MPMx card to the chassis.

Installing a New MPM/MPM+/MPMx Card in a Powered On RMX 2000

1If applicable, loosen the captive screws and remove the slot cover.

2On the card to be installed, move the ejector levers to their full open position.

3Insert the card into the slot until the ejector levers touch the front edge of the card cage.

4Push the ejector levers to their closed position and tighten the captive screws on each side of the card, securing the MPM/MPM+/MPMx card to the RMX.

1-36

Image 42

Contents Polycom RMX 2000 Hardware Guide USA Regulatory Notices United States Federal Communication Commission FCCChinese Communication Certificate Singapore Certificate Table of Contents Installing the Replacement MPM/MPM+/MPMx Card MCUMain Features Hardware DescriptionRMX 2000 Specifications RMX 2000 System Capacities Conferencing CapacitiesSystem Functions MPM Mode MPM+ Mode MPMx Mode Resource Capacities MPM+VSW 2Mb 160 VSW 4Mb VSW 6Mb Safety Requirements Rack Mount Safety PrecautionsSite Requirements Installation Precautions RMX 2000 Components RMX 2000 Front PanelComponent Description Cntl CPUComponent Description RMX 2000 Rear Panel RTM IPFollowing items appear on the RMX 2000 rear panel Management Network on page G-1RTM Isdn LAN portAll external connectors are located on the rear panel Cables Connected to the RTM IP & Isdn CardsMPM/MPM+ and MPMx Media Cards Resource Type Maximum Possible Resources Per CardMPMx HD720p HD1080p @30fps @60fps MPM+ MPM+ Resource Capacities per Card Type AssemblyCard Resources Bandwidth Type Up toAudio algorithm is not supported with MPMx MPMx Resource Capacities per Card AssemblyMPMx, MPM+ and MPM Modes Resource Type MPMx S MPMx DAll MPM MPMx OnlyMPM+ MPMx Only Inserted MPMx card is enabled An RMX has two MPM cards installedBoth MPM cards are enabled Remove one MPM card Insert one MPMx cardMPMx card is enabled Remaining MPM card is disabledAn RMX has one MPMx card installed Inserted MPM card is disabledFollowing items appear on the RMX 2000 front panel RMX 2000 LEDsRMX 2000 Front Panel LEDs ComponentCard removal Initiated The card Card Insertion Initiated If duringCntl Unit RMX 2000 Rear Panel LEDs Following LEDs appear on the RTM IP cardLED Color Description Name ShMG LEDs Following LEDs appear on the RTM Isdn Function NameRMX Chassis Types RMX 2000 General Information dialog box opensComponent Replacement Fully Open The card is released from the MCU housing Types of Ejector Levers on RMX ComponentsReplacing the Cntl Module Hardware Description Replacing the Power Supply Module Replacing the Fan Drawer Replacing a Faulty MPM/MPM+/MPMx Card Removing the MPM/MPM+/MPMx Card from the MCUInstalling a New MPM/MPM+/MPMx Card in a Powered On RMX Installing the Replacement MPM/MPM+/MPMx CardReplacing a RTM Isdn Card PRI Cables Replacing the RTM IP Card