Polycom 1725-36082-001 manual Radio Profile configuration, Access control list

Page 12

Configuration Guide

#Enables pre-shared-key authentication. set service-profile Voice auth-dot1x disable

#Disables 802.1x authentication.

set service-profile Voice attr vlan-name Voice

#Specifies the VLAN name to map the voice handsets traffic to.

Radio Profile configuration

The default Radio Profile needs to be modified to disable certain features to support the handsets. To modify the default Radio Profile using CLI:

set radio-profile default service-profile Voice

#Maps the voice service profile and SSID to the radio profile. This determines which 802.11 radios advertise and can support voice handsets.

set radio-profile default dtim-interval 3

# Sets the DTIM interval to support push-to-talk.

set radio-profile default auto-tune channel-config disable

#Disables automatic channel assignment for radios assigned to the radio profile. A static channel configuration is recommended to provide a stable and optimum RF environment for the handsets.

set radio-profile default active-scan disable

#Disables active-scanning which prevents the radios from going off-channel and disrupting voice services.

set radio-profile default qos-mode svp

#Sets the QoS mode to SVP. WMM support is not currently available on the SpectraLink Wireless Telephones.

Access control list

To create an access control list (ACL) that allows and prioritizes IP protocol 119 (SVP) with a Class of Service (CoS) 7 and allows all other IP traffic on the Voice VLAN using CLI:

set security acl ip SpectraLink permit cos 7 119 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255

#Creates an ACL that matches protocol 119 (SVP) and marks it with a CoS 7.

set security acl ip SpectraLink permit 0.0.0.0 255.255.255.255

#Creates an ACL that matches all traffic and ports. commit security acl SpectraLink

#Commits and applies the ACL.

12

PN: 1725-36082-001_G.doc

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Nortel Trademark Information Introduction Certified Product SummaryKnown Limitations Contacting Nortel Technical SupportNetwork Topology Access Point Capacity and Positioning Nortel Wlan Security Switch 2300 Series with AP-2330 Connecting APs Directly connected APsDistributed APs Command, comment, and screen text key Configuration Example CLI AP configurationVlan configuration Service profile / Ssid configuration Set service-profile Voice ssid-name VoiceRadio Profile configuration Access control listTo save the current changes to a WSS using CLI Saving changesConfiguration Example Wlan Management Software Adding a Wlan Security Switch to the Network PlanDistributed AP or Directly Connected AP Configuration Guide To configure the 802.11g Radio To configure the 802.11a Radio Network Plan Tasks panel, select Create Vlan For Vlan Name enter Voice Network Plan Tasks panel, select Igmp Service Profile / Ssid configuration Specify a Name and Ssid for the Voice Service Profile Select the Open Access check box. Click the Next button Settings for Wireless Encryption Cipher Suite Configuration Guide Nortel Wlan Security Switch 2300 Series with AP-2330 Click the Next button Nortel Wlan Security Switch 2300 Series with AP-2330 Radio Profile configuration Radio Profile Properties window, click the Radio Profile tab Configuration Guide Deploying changes Configuration Guide Example Configuration Files For Reference Only Configuration Guide Nortel Wlan Security Switch 2300 Series with AP-2330
Top Page Image Contents