Polycom 1725-36082-001 manual Introduction, Certified Product Summary

Page 3

Nortel: WLAN Security Switch 2300 Series with AP-2330

Introduction

Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and wireless LAN (WLAN) infrastructure products.

The products listed below have been thoroughly tested in Polycom’s lab and have passed VIEW Certification. This document details how to configure the Nortel WLAN Security Switch 2300 Series and WLAN AP-2330/2330A/2330B with SpectraLink Wireless Telephones.

Certified Product Summary

Manufacturer:

Nortel: www.nortel.com

 

 

 

 

 

 

 

 

 

 

 

Approved products:

WLAN Security Switches

 

Access points

 

 

2380

 

 

2330

 

 

2361

 

2330A

 

 

2360

 

 

2330B

 

 

2350

 

 

 

 

 

 

 

 

 

 

 

Security:

WPA-PSK and WPA2-PSK

 

2300 software version certified:

Release 5.0.11.4

 

 

 

 

SpectraLink handset models certified: **

e340/h340/i640

 

8020/8030

 

 

 

 

 

 

 

SpectraLink handset software certified:

89.119

 

 

122.010 or greater

SpectraLink radio mode:

802.11b

 

802.11b

 

802.11a

Maximum telephone calls per AP:

10

 

10

 

12 *

 

 

 

 

 

Recommended network topology:

Switched Ethernet (required)

 

Denotes products directly used in Certification testing.

*Maximum calls tested during VIEW Certification. The certified product may actually support a higher number of maximum calls for 802.11a radio modes.

**SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are VIEW Certified with the WLAN hardware and software identified in the table. Throughout the remainder of this document they will be referred to collectively as “SpectraLink Wireless Telephones”.

Service Information

The access point (AP) must support SpectraLink Voice Priority (SVP). Contact your AP vendor if you need to upgrade the AP software.

PN: 1725-36082-001_G.doc

3

Image 3
Contents Nortel Trademark Information Certified Product Summary IntroductionContacting Nortel Technical Support Known LimitationsNetwork Topology Access Point Capacity and Positioning Nortel Wlan Security Switch 2300 Series with AP-2330 Connecting APs Directly connected APsDistributed APs Command, comment, and screen text key Configuration Example CLI AP configurationVlan configuration Set service-profile Voice ssid-name Voice Service profile / Ssid configurationAccess control list Radio Profile configurationSaving changes To save the current changes to a WSS using CLIAdding a Wlan Security Switch to the Network Plan Configuration Example Wlan Management SoftwareDistributed AP or Directly Connected AP Configuration Guide To configure the 802.11g Radio To configure the 802.11a Radio Network Plan Tasks panel, select Create Vlan For Vlan Name enter Voice Network Plan Tasks panel, select Igmp Service Profile / Ssid configuration Specify a Name and Ssid for the Voice Service Profile Select the Open Access check box. Click the Next button Settings for Wireless Encryption Cipher Suite Configuration Guide Nortel Wlan Security Switch 2300 Series with AP-2330 Click the Next button Nortel Wlan Security Switch 2300 Series with AP-2330 Radio Profile configuration Radio Profile Properties window, click the Radio Profile tab Configuration Guide Deploying changes Configuration Guide Example Configuration Files For Reference Only Configuration Guide Nortel Wlan Security Switch 2300 Series with AP-2330