Configuration Guide

set vlan 2 name Voice set vlan 2 port 8 tag 2 set igmp disable vlan Voice

set interface 1 ip 192.168.1.50 255.255.255.0

set security acl ip SpectraLink permit cos 7 119 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255

set security acl ip SpectraLink permit 0.0.0.0 255.255.255.255

commit security acl SpectraLink

set security acl map SpectraLink vlan Voice in set security acl map SpectraLink vlan Voice out

The following configuration file provides an example configuration to support SpectraLink Wireless Telephones using WPA2-PSK:

#Configuration nvgen'd at 2007-7-26 22:53:41

#Image 5.0.11.4.0

#Model 2360

#Last change occurred at 2007-7-26 22:53:34 set ip route default 192.168.1.1 1

set system name WSS2360

set system ip-address 192.168.1.50 set system countrycode US

set timezone EST -5 0

set service-profile Voice ssid-name Voice

set service-profile Voice auth-fallthru last-resort set service-profile Voice rsn-ie enable

set service-profile Voice cipher-tkip disable set service-profile Voice cipher-ccmp enable

set service-profile Voice psk-phrase enter-a-passphrase set service-profile Voice auth-psk enable

set service-profile Voice auth-dot1x disable set service-profile Voice attr vlan-name Voice set enablepass password enable-password

set user admin password admin-password

set radio-profile default service-profile Voice set radio-profile default dtim-interval 3

set radio-profile default auto-tune channel-config disable

set radio-profile default active-scan disable set radio-profile default qos-mode svp

set dap 1 serial-id stpw20kc3 model 2330