Polycom 1725-36082-001 manual Service profile / Ssid configuration

Page 11

Nortel: WLAN Security Switch 2300 Series with AP-2330

Service profile / SSID configuration

To create a SSID named Voice using WPA-PSK that will be advertised on 802.11a/b/g radios using CLI:

set service-profile Voice ssid-name Voice

#Creates a new service profile and SSID named Voice. Note it’s a best practice recommendation to use the same name for both the service profile and SSID

set service-profile Voice auth-fallthru last-resort

#Sets the authentication type to open authentication. With WPA-PSK the pre-shared key will be used to authenticate the handset.

set service-profile Voice wpa-ie enable

# Enables WPA security.

set service-profile Voice psk-phrase <enter-a- passphrase>

#Defines the passphrase required to access the SSID. set service-profile Voice auth-psk enable

#Enables pre-shared-key authentication.

set service-profile Voice auth-dot1x disable

# Disables 802.1x authentication.

set service-profile Voice attr vlan-name Voice

#Specifies the VLAN name to map the voice handsets traffic to.

To create a SSID named Voice using WPA2-PSK that will be advertised on 802.11a/b/g radios using CLI:

set service-profile Voice ssid-name Voice

#Creates a new service profile and SSID named Voice. Note it’s a best practice recommendation to use the same name for both the service profile and SSID

set service-profile Voice auth-fallthru last-resort

#Sets the authentication type to open authentication. With WPA-PSK the pre-shared key will be used to authenticate the handset.

set service-profile Voice rsn-ie enable

# Enables WPA2 security.

set service-profile Voice cipher-tkip disable

# Disables TKIP encryption.

set service-profile Voice cipher-ccmp enable

# Enables AES/CCMP encryption.

set service-profile Voice psk-phrase <enter-a- passphrase>

#Defines the passphrase required to access the SSID. set service-profile Voice auth-psk enable

PN: 1725-36082-001_G.doc

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Nortel Trademark Information Certified Product Summary IntroductionContacting Nortel Technical Support Known LimitationsNetwork Topology Access Point Capacity and Positioning Nortel Wlan Security Switch 2300 Series with AP-2330 Distributed APs Connecting APsDirectly connected APs Command, comment, and screen text key Vlan configuration Configuration Example CLIAP configuration Set service-profile Voice ssid-name Voice Service profile / Ssid configurationAccess control list Radio Profile configurationSaving changes To save the current changes to a WSS using CLIAdding a Wlan Security Switch to the Network Plan Configuration Example Wlan Management SoftwareDistributed AP or Directly Connected AP Configuration Guide To configure the 802.11g Radio To configure the 802.11a Radio Network Plan Tasks panel, select Create Vlan For Vlan Name enter Voice Network Plan Tasks panel, select Igmp Service Profile / Ssid configuration Specify a Name and Ssid for the Voice Service Profile Select the Open Access check box. Click the Next button Settings for Wireless Encryption Cipher Suite Configuration Guide Nortel Wlan Security Switch 2300 Series with AP-2330 Click the Next button Nortel Wlan Security Switch 2300 Series with AP-2330 Radio Profile configuration Radio Profile Properties window, click the Radio Profile tab Configuration Guide Deploying changes Configuration Guide Example Configuration Files For Reference Only Configuration Guide Nortel Wlan Security Switch 2300 Series with AP-2330
Top Page Image Contents