Polycom 1725-36082-001 manual Deploying changes

Page 33

Nortel: WLAN Security Switch 2300 Series with AP-2330

Deploying changes

Deploying the changes in WMS will upload and save the configuration to the WSS. To deploy the changes in WMS:

1.In WMS click Devices on the tool bar.

2.In the Local Changes Task List panel, select Deploy to upload and save the configuration changes to the WSS.

You may also Review, Schedule and Undo changes in the Local Changes

Task List panel.

PN: 1725-36082-001_G.doc

33

Image 33

Contents Nortel Trademark Information Certified Product Summary IntroductionContacting Nortel Technical Support Known LimitationsNetwork Topology Access Point Capacity and Positioning Nortel Wlan Security Switch 2300 Series with AP-2330 Connecting APs Directly connected APsDistributed APs Command, comment, and screen text key Configuration Example CLI AP configurationVlan configuration Set service-profile Voice ssid-name Voice Service profile / Ssid configurationAccess control list Radio Profile configurationSaving changes To save the current changes to a WSS using CLIAdding a Wlan Security Switch to the Network Plan Configuration Example Wlan Management SoftwareDistributed AP or Directly Connected AP Configuration Guide To configure the 802.11g Radio To configure the 802.11a Radio Network Plan Tasks panel, select Create Vlan For Vlan Name enter Voice Network Plan Tasks panel, select Igmp Service Profile / Ssid configuration Specify a Name and Ssid for the Voice Service Profile Select the Open Access check box. Click the Next button Settings for Wireless Encryption Cipher Suite Configuration Guide Nortel Wlan Security Switch 2300 Series with AP-2330 Click the Next button Nortel Wlan Security Switch 2300 Series with AP-2330 Radio Profile configuration Radio Profile Properties window, click the Radio Profile tab Configuration Guide Deploying changes Configuration Guide Example Configuration Files For Reference Only Configuration Guide Nortel Wlan Security Switch 2300 Series with AP-2330